Technical data

Getting started
15
The memory card must be formatted the FAT16 file system. In case there is an error
message upon inserting the card you can re-format it in the device. All data on the
card, however, will get lost this way.
If you wish to use memory cards with more than 2 GByte (e.g. 4 GByte) the card
must be formatted once in your tiptel 570 SD. The device will partition the card in
such a way that there is only one partition with the size of 2 GByte is available. This
operation cannot be undone.
A standard card reader in your computer can be used to read out the memory card,
so that you can archive recordings to your computer or just play them back on your
computer. Recordings that have been edited or renamed by your computer can no
longer be played back with your tiptel 570 SD.

Only replace the memory card in the devices basic mode. Never replace or
pull the card during play back or recording.