Tiptel3220 User Guide
Contents 1. Overview .................................................................................................................................................................... 5 1.1. Introduction ................................................................................................................................................. 5 1.2. Features ...............................................................................................................................................
.23. Hoteling ................................................................................................................................................... 24 3.24. Application ............................................................................................................................................. 25 3.24.1. Text Message ............................................................................................................................ 25 3.24.2. Voice Message ............
5.15. Phone –>Action URL........................................................................................................................... 63 5.16. PhoneBook->Local Phone Book .................................................................................................... 65 5.17. Phone Book->Remote Phone Book .............................................................................................. 67 5.18. Phone Book->Call log ..............................................................
1.Overview 1.1. Introduction The Tiptel3220 is a featured 2-line IP phone with full duplex hands-free speakerphone. It can be directly connected to an Internet Telephony Service Provider or to an IP PBX. Based on the SIP standard, the Tiptel3220 has been tested to ensure comprehensive interoperability with equipment from VoIP infrastructure leaders enabling service providers to quickly roll-out competitive, feature rich services to their customers.
1.2. Features Highlights HD Voice Up to 2 SIP Accounts 2.
SMS, Voicemail, MWI message Notification Wideband Codec: G.722 Narrowband Codec: PCMA, PCMU, G.729, G723_53, G723_63, G726_16, G726_24, G726_32, G726_40 VAD, CNG , Echo Canceller Full-Duplex Speakerphone Network Features SIP V1(RFC2543), V2(RFC3261) Static IP/DHCP for IP configuration 3 DTMF modes: In-Band, RFC2833, SIP INFO HTTP/HTTPS Web Server for Management NTP for Auto Time Setting TFTP/FTP/HTTP/HTTPS Protocols 802.
1.3. Keypad Keypad, LED, and function key definitions Keypad Description Key Key name Function Description Navigation Assists you in selecting an item that you want to process under the menu by pressing the Up, Down, Right or Left key. Press the center key to save, Press Cancel to return.
allReturn/HotDesking/Record/XML Browser/DTMF/DND/ Menu/MSG/Status/Book/Fwd/PickUp/Group Home Book Headset R key Redial Mute Volume -/+ Handfree PickUp/Intercom/Speed Dial/and so on. Back to the Home page View Local Phone Book/Blacklist/Remote Phone Book Use the headset to call out or call in Forward the call to the third part View the Missed Calls, Incoming Calls and Dialed Calls. Press this key in calling mode and you can hear the other side, but the other side cannot hear you.
Rear view and panel descriptions Port Port name Power switch Description Input: 5V DC 1.
1.4.
2.Installation 2.1. Check package contents Please refer to the package list below to check the completeness of package Name Quantity SIP Phone unit 1 Power Adapter 1 handset RJ-9 Cable RJ-45 Cable Stand Quick installation guide 2.2.
2.3. Installation Steps Step 1 – Connect the power Connect the provided power adapter to the Power port and plug the adapter into an available power outlet. The LCD will display “Initializing, Please Wait…” ------------------------------------------------------------------------------------------------------Note1: Never use a power adapter other than the one provided with Tiptel3220 Note2: Only Internet port supports POE.
3.Functions 3.1. Make a call 3.1.1.Call Devices User can make a phone call via the following methods： 1. Pick up the handset, 2. Press the Handfree key, icon will be shown on the idle screen. icon will be shown on the idle screen. 3. Press the Headset key if the headset is connected to the Headset Port in advance. The icon will be shown on the idle screen. User can also dial the number first, and then choose the method user will use to speak to the other party. 3.1.2.
current talking. During the conversation, User can alternate between Headset, Handset and Handfree by pressing the corresponding keys. Note: The will flash during the Incoming interface 3.3. Mute You can press the Mute key can hear the other party. and again to recover. to make the user NOT be heard by the other party, but User icon will be shown on the LCD, and press the Mute key 3.4. Call Hold/Resume 1. Press the Hold button or Hold soft key to put User active call on hold. 2.
3.7. Call Forward You can set the static forward to switch all the incoming calls to specified number; Also you can use dynamic forward to switch all the incoming calls forward to the number inputted when the phone is ringing. Forward: Enable call forward feature, Options as follows： Always forward: All the incoming calls will be the Switched unconditionally to specified number. phone is busy.
3. Press the R key or the Trans soft key to transfer the hold talking to the number you want to transfer to; 4. Return to the Idle automatically ; Note: The UI will display Hold status interface when the number you want to transfer to is not existed. 3.8.2.Consultation Transfer 1. Press the Trans soft key to enter the number you want to transfer to during the talking; Input the number you want to transfer to ; 2. Press the OK key on the phone keyboard or the Dial key to make a call； 3.
5. Press the Conference soft key to start 3-way conference. 6. Press the Split soft key to split to two lines standalone talking, then this two parties talking are under Hold status: 7. HOLD Press the Resume soft key to resume the current talking: 8. Press the Cancel soft key or the Idle : key to cancel the conference talking and return to 3.9.2.Make two lines talking attend conference 1.
Account-->Press the Save soft key to save; 3.11.Pickup You can use pickup to answer other users’ incoming call. The IP phone Tiptel3220 supports specified pickup and group pickup. Note: Press the group pickup only to answer line 1 incoming call if there are many lines incoming calls in group. 3.11.1.Specified Pickup Specified pickup can answer specified user’s incoming calls 1.
3.13.Auto-redial When hang-up by the other party, call failure during the calling, the phone will enter the auto-redial screen, and begin to count. Press OK for redial now or wait for the time is up. After trying the times of setting of auto-redial, the phone will hang-up automatically. To configure Auto Redial via Phone interface: 1. Press Menu -->Features-->Auto Redial-->Enter, ; 2. Use the Left or Right key to activate or deactivate Auto Redial. 3.
3. 4. Answer the intercom incoming calling In default situation, the IP phone Tiptel3220 will answer the intercom incoming calling automatically and make a noise. You can set the phone to enable silent mode when picking up the intercom call so that the other will not hear you 。 The features of intercom： 3.16.HotDesking In some working place, the people are always walking around. HotDesking feature will make the staffs login his account on any computer in the company.
3.17.XML Browser XML Browser allows the users to develop and deploy custom services. Users need to pre-configure a custom service functions on the server, such as news, weather report, stock information. The user receives and displays the service information on the IP phone from the server, and all service information are transmitted in XML object.
and you can choose to lock the function keys or all keys. And this function can only be configured through the web UI, please refer to the web interface for the details. Function Keys: The function keys are locked. You cannot use the LIINE KEYS, MESSAGE KEY, SOFT KEYS, NAVIGATION KEYS, and FUNCTION KEYS until unlocked. All Keys: All keys are locked. 3.20.Busy Lamp Field (BLF) Busy Lamp Field (BLF) is used to monitor a specific user for status changes on IP phones.
LIST CODE，can Pick up call or Barge in call. Note: BLFListCode is supported by Broadsoft platform, Please consult your administrator further information. 3.22.Automatic Call Distribution(ACD) Automatic Call Distribution (ACD) enables organizations to manage a large number of phone calls on an individual basis. ACD enables the use of IP phones in a call-center role by automatically distributing incoming calls to available users, or agents. ACD depends on support from a SIP server.
The host ip phone number is 2404984721 Press GuestIn softkey to login the extension number 4723 and password The extension number 4723 is ready for use 3.24.Application 3.24.1. Text Message The IP phone Tiptel3220 can send and answer text message.
Note: Not all servers support message feature. Read Text Message 1. Access Menu->Message->Text Message-> In box 2. Press the OK key on the phone keyboard or the Enter soft key to enter the Text Message interface, Press the OK key on the phone keyboard or the Enter soft key to enter the in-box interface. 3. Select the message you will read and Press the OK key on the phone keyboard or the Enter soft key to read. Send Text Message 1. In the Idle, press the Menu soft key 2.
7. Press the Send soft key to send message. Delete Text Message 1. In the Idle, press the Menu soft key 2. Press the main menu interface, Press the Down key on the phone keyboard to select message, Press the OK key on the phone keyboard or the Enter soft key to enter the Message interface： 3. In the Text Message interface, press the Down key on the phone keyboard to select in-box： 4. Press the OK key on the phone keyboard or the Enter soft key to enter the in-box interface： 5.
You can leave a message when the user who you call is busy or unavailable. Leave a message according to the voice prompt of server, and then hang up after leaving the message. Set Visit account number of voice message via phone interface. 1. In the Idle, press the Menu soft key： 2. In the Idle, Press the Down key on the phone keyboard to select message, press the OK key on the phone keyboard or the Enter soft key to enter the Message interface. 3.
messages and old messages of each account. 2.
4.Settings 4.1. Basic Settings 4.1.1. Language You can change the language through below method: Press Menu -> Settings -> Basic Setting -> Language 4.1.2. Date & Time 1. The IP phone displays Time and Date in Idle status. You can set the Time and Date obtain from SNTP server automatically or you can set the time and date manually. 2. Set SNTP via phone interface: Access Menu -> Settings -> Basic Setting -> Date & Time -> SNTP Setting. 3.
4.1.3. Backlight Set the screen backlight level and duration of backlight Press Menu -> Settings -> Basic Setting ->Backlight 4.1.4. Password Setting This function is to set into the advanced Settings password Press Menu -> Settings -> Advanced Setting ->Password Setting A dialog box “Enter Password:” appears, enter the password: admin (default), then Press the OK key on the phone keyboard, Input the currently password, the new password, then confirm new password to modify the current password. 4.2.
4.2.2. Ring Tones 1. The Ring Tone refers to incoming ring tone, which remind the user that new call is coming with the phone. The IP phone Tiptel3220 supports phone ring tone to distinguish the incomings from other near phones’ ring tone; Besides, The IP phone Tiptel3220 support specifying different incoming ring tones for multi-accounts in one phone equipment, At the same time, the IP phone Tiptel3220 also support setting specific incoming ring tone for contacts. 2.
4.3.1.1.2.Add contact from All Calls History： Add contact from All Calls History in the phone interface: 1. Press the History soft key; 2. Press the Up or Down key on the phone keyboard to select the contact you want to add; 3. Press the Option soft key to add to contacts。 4.3.1.1.3.Search Contacts 1. Press the Book soft key in the Idle interface to enter the Phone Book menu： 2. Select the Local Phone Book, Press the OK key on the phone keyboard or the Enter soft key to enter the Local Phone Book： 3.
10. Press the key or the Back soft key to unlink。 11. Press the Book soft key to enter the Phone Book Menu： 4.4. History Management The History management of IP phone Tiptel3220 contains dialed calls, received calls, missed calls and forwarded calls and support 100 logs storage at most. You can check the history, make calls from the calls history and delete the calls history 。 1. 2. 3.
4.5.2.1.Register an Account Register an account via phone interface： 1. Press the Menu soft key to enter setting interface to select advanced setting, input password(password: admin) to select account； 2. Select the account you want to set and press the Enter soft key； 3. Select “Enable” in the account activation status area； 4. Input the label, display name, register name, account, password and SIP separately； 5. Press the Save soft key to save or the Back soft key to cancel； 6.
4.6.2. Static IP Mode 1. In the LAN Port interface, press the Up or Down key on the phone keyboard to select Static IP, then Press the OK key on the phone keyboard or the Enter soft key to enter Static IP Setting interface and input IP address. 2. Press the Down key on the phone keyboard to enter the Subnet Mask of Static IP Setting and input the subnet mask. 3.
Port, press the OK key on the phone keyboard or the Enter soft key to enter LAN Port： 2. In the LAN Port interface, press the Up or Down key on the phone keyboard to configure the functionality Enable, VID, Priority: 3. When the VID is empty，press the OK key on the phone keyboard or the Save soft key to save; 4. Save it after configuration. PC Port 1.
5.WEB Interface Web user interface (we will used Web UI for short in the following context) which is used for user or administration to check or change the IP SIP phone’s settings. Press the OK key on the phone keyboard to check the Phone’s IP address. Type the IP address on IE: http://192.168.1.43 input default User Name and Password: admin/admin to login the web interface. 5.1. Status->Basic 1. First you need to open a browser (for example IE) 2.
Sections Product Information Network Information Account Information Description To display the device’s information such as Model name, MAC address (IP device’s physical address), Firmware version and Hardware firmware.
Sections SIP Account SIP Server 1 Description To display and configure the specific Account settings. Status: To display register result. Display Label: Which is displayed on the phone’s LCD screen. Display Name: Which is sent to the other call party for displaying. Register Name: Allocated by SIP server provider, used for authentication. User Name: Allocated by your SIP server provide, used for authentication. Password: Used for authorization.
SIP Server 2 Outbound Proxy Server Transport Type NAT Registration Period: The registration will expire after Registration period, the IP phone will re-register automatically within registration period. To display and configure Secondary SIP server settings. This is for redundancy, if registering to Primary SIP server fails, the IP phone will go to Secondary SIP server for registering.
Sections SIP Account Codecs Subscribe DTMF Call Description To display current Account settings or to select which account to display. To display and configure available/unavailable codecs list. Codec means coder-decoder which is used to transfer analog signal to digital signal or vice versa. Familiar codecs are PCMU(G711U), PCMA(G711A), G722 (wid-bandth codecs), G723,G726,G729 and so on. To display and configure MWI, BLF, ACD subscription settings.
Music Server Address Session Timer BLF List Broadsoft Encryption NAT user=phone: If enabled, IP phone will send user=phone within SIP message. PTime: Interval time between two consecutive RTP packets. Anonymous Call: If enabled, all outgoing call for the designated account will be anonymous number. Anonymous Call Rejection: If enabled, all incoming anonym-out call for the designated account will be rejected. Is escape non Ascii character: To transfer the symbol to Ascii character.
into outgoing SIP message for designated account. 5.4. Network->Basic Path:Web UI->Network->Basic Sections LAN Port PC Port Description To display and configure LAN Port settings. DHCP: If selected, IP phone will get IP address, Subnet Mask, Default Gateway and DNS server address from DHCP server automatically. Static IP: If selected, you have to set IP address, Subnet Mask, Default Gateway and DNS server manually. PPPoE: Use PPPoE username/password to connect to PPPoE server.
route all incoming and outgoing packets from PC port. 5.5.
Sections LLDP Description To display and configure LLDP settings. LLDP Active: To enable or disable LLDP feature.
Local RTP SNMP VLAN QoS TR069 message. Note: LLDP stands for Link Layer Discovery Protocol, it’s used to exchange device information between any two directly-connected devices. LLDP is often used to configure Voice Vlan automatically for IP phone. To display and configure Local RTP settings. Max RTP Port: Determine the maximum port that RTP stream can use. Min RTP Port: Determine the minimum port that RTP stream can use. To display and configure SNMP settings.
VPN Note: TR-069(Technical Report 069) is a technical specification entitled CPE WAN Management Protocol (CWMP).It defines an application layer protocol for remote management of end-user devices. To display and configure VPN settings. Active: To enable or disable VPN feature. Upload: To upload VPN client configuration file which is used to connect to VPN server. Note: For now, IP phone can only support OpenVPN. 5.6.
Sections Web Language LCD Language Format Setting Description To choose the web language. To choose the phone language. To configure time display settings. Time Format: Determine what format to display on Phone UI (12 hour/24 hour). Date Format: Determine what format to display on Phone UI for Date.
Type NTP Daylight Saving Time Time&Date on Phone UI. To select how to configure time, it could be set by manually or get from INTERNET automatically via NTP server. Manual: To set Time and Date manually. Auto: To get Time via NTP server. Note: If you set time to be Manually, it only tak effect till next reboot, after reboot, the phone will switch to Auto mode automatically, because there is no way for IP phone to record time during power off. To configure NTP server related settings.
Sections Headset Mode Key Press Sound Ringtone Volume Description To enable or disable Headset Mode. Active: If enabled, the default audio track will be headset mode, if audio track is changed during a call, it will be back to headset mode after you hangup the call. To configure the sound volume for key press. Volume: The valid volume range is from 0~15,by default it’s 8. To configure the sound volume for ringtone. Volume: The valid volume range is from 0~15,by default it’s 8. 5.8.
Sections Forward Transfer Call Waiting Auto Redial DND Description To display and configure Forward setting. Note: There are three types of forward: Always Forward, Busy Forward and No answer Forward. Always Forward: Any incoming call will be forwarded in any situation. Busy Forward: An incoming call will be forwarded if IP phone is busy. No answer Forward: An incoming call will be forwarded if it’s no answer after a specific time. To enable or disable Call Waiting.
Intercom HotLine ACD Remote Control Keypad Lock Key As Send Others Note: Please consult with your telephony administrator for special extension on your system. system Intercom allow user to establish a call directly with the callee. Active: To enable or disable Intercom feature. Intercom Mute: If enabled, once the call established, the callee will be muted. HotLine allows user to call out a defined number automatically after hearing the dailtone without dialing any number.
incoming call is automatically answered. 5.9. Phone->Voice Path: Web UI->Phone->Voice Sections Echo Canceller Description Echo Canceller: To remove acoustic echo from a voice communication in order to improve the voice quality . VAD (Voice Activity Detection): Allow IP phone to detect the presence or absence of human speech during a call. When detecting period of “silence”, VAD replaces that silence efficiently with special packets that indicate silence is occurring.
Jitter Buffer Mic Volume CNG (Comfort Noise Generation): Allow IP phone to generate comfortable background noise for voice communications during periods of silence in a conversation. It is a part of the silence suppression or VAD handling for VoIP technology. CNG, in conjunction with VAD algorithms, quickly responds when periods of silence occur and inserts artificial noise until voice activity resumes.
Sections Line Key Soft Key Function Key Description Allows user to assign specific feature to the designated line key. For line key, the available feature list: DND, Menu, MSG, Status, Book, Fwd, PickUp, Group PickUp, Intercom, Speed Dial, History, Favorites, Redial, Account, ACD, BLF, BLFList, Call Return, Hot Desking, Record, XML Browser, DTMF. Allows user to assign specific feature to the designated soft keys.
PickUp, Intercom, Speed Dial, History, Favorites, Redial, Call Return, Hot Desking, XML Browser. Others Backlight Intensity: To adjust the backlight intensity of Phone UI. Backlight Time: To adjust backlight on timer, once expired the backlight of Phone UI will go off. 5.11.Phone->Ring tones Path: Web UI->Phone->Ringtones Sections All Ringtones Description Allow user to upload and view ringtone files or delete uploaded ringtone files. Note: Ringtone files must be .
Distinctive Ringers delete uploaded ringtones. Distinctive ringers allows different incoming calls to trigger distinctive ringtones. The IP phone will check "Alert-Info" header inside the incoming “invite” SIP message. And strip out the URL or keyword inside the “Alert-Info” header, from the specific URL or keyword to match or download designated ringtones to play. 5.12.
5.13.Phone->Dial Plan->Replace Rule Path:Web UI->Phone->Dial Plan->Replace Rule Sections Rules Rules Modify Area Code Description Allow user to select Replace rule or Dial-now to display or edit. Allow user to modify selected rules information, for replace rule, you can modify related accounts, prefix and replace. Area codes are also known as NPAs (Numbering Plan Areas). They usually indicate different geographical areas within one country.
5.14.Phone ->Dial Plan->Dial Now Path: Web UI->Phone->Dial Plan->Dial Now Sections Rules Dial Now Delay Rules Modify Area Code Description Allow user to select Replace rule or Dial-now to display or edit. Allow user configure dial now delay time for dial now. It means user can configure the IP phone to dial out the phone number automatically after the designated delay time if it match any dial now rule.
5.15.Phone –>Action URL Path: Web UI->Phone->Action URL Sections Action URL Description To display and configure Action URL settings. Setup Completed: When the IP phone completes startup.
account. Unregistered: When the IP phone logs off the registered account. Register Failed: When the IP phone fails to register an account. Off Hook: When the IP phone is off hook. On Hook: When the IP phone is on hook. Incoming Call: When the IP phone receives an incoming call. Outgoing Call: When the IP phone places a call. Established: When the IP phone establishes a call. Terminated: When the IP phone terminates a call.
Transfer Failed: When the IP phone fails to transfer a call. Idle To Busy: When the state of the IP phone changes from idle to busy. Busy To Idle: When the state of phone changes from busy to idle. 5.16.
Sections Contact Search Dial Description To display and select local contact type. All Contacts: To display or edit all local contacts. Favorites: To display or edit favorites contacts. Black List: To display black list contacts. To search designated contacts from local phonebook. To dial out a call or hangup an ongoing call from Web UI.
Group Group Setting Import/Export privilege to control IP phone via Web UI. Please refer to section “Remote Control” in the Web UI->Phone->Call Feature page. To display or edit Group contacts. To display or change Group name, related ringtone or description. To import or export the contact or blacklist file. 5.17.Phone Book->Remote Phone Book Path: Web UI->PhoneBook->Remote Book Sections Remote Book Description To display and configure Remote Book settings.
Phone UI Note: IP phone support at most 5 remote books. Please refer to your administrator for how to establish a remote book server and how to create remote book xml file. 5.18.Phone Book->Call log Path: Web UI->PhoneBook ->Call Log Sections Call History Description To display call history records. Available call history type are All calls, Dialed calls, Received calls, Missed calls, Forwarded calls. HangUp: To click to hangup ongoing call on the IP phone.
5.19.Phone Book->LDAP Path: Web UI->PhoneBook->LDAP Sections LDAP Description To display and configure LDAP phonebook settings. Name Filter: The settings used to tell LDAP server what name attributes to search. Number Filter: The settings used to tell LDAP server what number attributes to search. Server: To configure LDAP server’s address. Port: To configure LDAP server’s port. Base DN: To configure searching base DN on LDAP server. User Name: To configure user name for accessing LDAP server.
Number Attribute: To configure which number attributes should be feedback from LDAP server. Display Name: To configure display name on Phone UI when there is any searching result from LDAP server. Max Hits: To configure the maximum size of result response from LDAP server. Search Delay Time: To configure delay time before initiate LDAP searching request after you input a value from Phone UI. Note: For setting details, please consult with your system administrator for further information. 5.20.
PhoneBook Item: To select specific item to configure. Display Name: The name displayed at IP phone’s LCD screen when accessed via Phone UI. Server Address: Broadsoft PhoneBook server’s address. Server Port: Broadsoft PhoneBook server’s port. User Name: Username used to access Broadsoft PhoneBook server. Password: Password used to access Broadsoft PhoneBook server. Note: IP phone supports at most 5 Broadsoft PhoneBook items.
Sections Upgrade Firmware version Hardware Version Reset to Factory Setting Reboot Description To select upgrading rom file from local or a remote server automatically. Note: Please make sure it’s right file format for right model. To display firmware version, firmware version starts with MODEL name. To display Hardware version. To enable you to reset IP phone’s setting to factory settings. To reboot IP phone remotely from Web UI. 5.22.
Sections PNP Option DHCP Option Manual Update Server AutoP System Log PCAP Description To display and configure PNP setting for Auto Provisioning. PNP: Plug and Play, once PNP is enabled, the phone will send SIP subscription message to PNP server automatically to get Auto Provisioning server’s address. By default, this SIP message is sent to multicast address 224.0.1.75(PNP server address by standard). To display and configure custom DHCP option.
capturing once reaching this maximum size. Others To display or configure others features from this page. Config file: To export or import configure file for IP phone. 5.23.Security->Basic Path: Web UI->Security->Basic Sections Web Password Modify Description To modify user’s password. Current Password: The current password you used. New Password: Input new password you intend to use. Confirm Password: Repeat the new password. Note: For now, IP phone can only support user admin. 5.24.
Sections Web Server Certificate Web Server Certificate Upload Client Certificate Client Certificate Upload Description To display or delete Certificate which is used when IP phone is connected from any incoming HTTPs request. Note: The default certificate could not be deleted. To upload a certificate file which will be used as server certificate. To display or delete Certificates which is used when IP phone is connecting to any HTTPs server.
6.Troubleshooting Issue 1：The LCD does not light up Check the AC power adapter. Make sure it is the one provided in your package. Check the power outlet. Make sure that the power that outlet you are plugging your device into is working. Try to plug a different device into the socket to make sure it has power. Issue 2：No signal tone heard from the handset Check the connection cord between the handset and the phone. Make sure it is connected properly.
7.
Time Zone Time Zone Name −03:00 Denmark-Greenland(Nuuk) −03:00 Brazil(no DST) −03:00 −03:00 −02:00 Argentina(Buenos Aires) Brazil(DST) Brazil(no DST) −01:00 Portugal(Azores) 0 Greenland 0 GMT 0 Denmark-Faroe Islands(Torshavn) 0 Portugal(Lisboa, Porto, Funchal) 0 Ireland(Dublin) 0 Spain-Canary Islands(Las Palmas) 0 Morocco 0 +01:00 +01:00 United Kingdom(London) Albania(Tirane) Austria(Vienna) +01:00 Belgium(Brussels) +01:00 Chatam +01:00 +01:00 Caicos Croatia(Zagreb) +01:00
Time Zone Time Zone Name +02:00 Finland(Helsinki) +02:00 Greece(Athens) +02:00 +02:00 Gaza Strip(Gaza) Israel(Tel Aviv) +02:00 Jordan(Amman) +02:00 Lebanon(Beirut) +02:00 +02:00 +02:00 Latvia(Riga) Moldova(Kishinev) Russia(Kaliningrad) +02:00 Romania(Bucharest) +02:00 Turkey(Ankara) +02:00 Syria(Damascus) +02:00 Ukraine(Kyiv, Odessa) +03:00 Iraq(Baghdad) +03:00 East Africa Time +03:00 Russia(Moscow) +04:00 Armenia(Yerevan) +04:00 Georgia(Tbilisi) +03:30 +04:00 Iran(Teheran
Time Zone Time Zone Name +08:00 China(Beijing) +08:00 Singapore(Singapore) +09:00 Korea(Seoul) +08:00 +09:00 Australia(Perth) Japan(Tokyo) +09:30 Australia(Adelaide) +10:00 Australia(Sydney, Melbourne, Canberra) +10:00 Australia(Hobart) +09:30 +10:00 +10:00 Australia(Darwin) Australia(Brisbane) Russia(Vladivostok) +10:30 Australia(Lord Howe Islands) +12:00 New Zealand(Wellington, Auckland) +13:00 Tonga(Nukualofa) +11:00 +12:45 New Caledonia(Noumea) New Zealand(Chatham Islands)
