Technical data

Appendix
17
Power failure
The internal clock stops if there is a power failure in the telephone network. All set-
tings are retained however, meaning the settings stay as they were before when
power is restored. All you need to do is reset the clock.
Technical data
Dimensions (W x H x D): 210 x 153 x 100 mm
Weight: approx. 610 g
Telephone cable: approx. 2 m
Volume: 8 levels adjustable for speakerphone and ringer
4 levels adjustable for handset receiver
Dialing: Supports both pulse and tone (DTMF) dialing
Pause time: 1.2/2.4/3.6s adjustable (for use with a PABX)
Flash time adjustable: 100ms, 200ms, 300ms, 400ms, 600ms, 900ms
Speed dial memories: 3
LCD-contrast: 5 settings
Caller-ID: FSK or DTMF
Length of Caller-ID: 20 digits
Caller list: 60 caller ID memories
Redial: Last 16 dialed numbers
Phone book: 135 entries
Ambient temperature: 0 – 40 ° C
Ring melodies: 16
Speakerphone: half-duplex
Warranty
Your point of contact for warranty obligation benefits is the specialist retailer where
you acquired your device.
Warranty conditions are based upon the legal regulations of the country in which
the device was purchased. Your specialist retailer will be glad to provide more in-
formation.