Manual (en) Feature Phone with hands-free operation and telephone book tiptel 1030 tiptel 1031 tiptel
Contents Contents Contents .......................................................................................................... 3 Safety notices .................................................................................................. 5 Product features .............................................................................................. 6 Scope of delivery ........................................................................................ 6 Button allocation ..................
Contents Appendix .......................................................................................................... 16 Troubleshooting .......................................................................................... 16 Power failure ............................................................................................... 17 Technical data............................................................................................. 17 Warranty .........................................
Safety notices Safety notices Please observe the following very closely when setting up, connecting and using the telephone: Only plug the connection cables into sockets designated for this use. Lay the connection cables such that they do not pose any risk of accidents. Connected cables must not be subjected to excessive mechanical stress. Set up the device away from electrical interference. Only connect accessories that are permitted for this device. Never open up the device yourself.
Safety notices Product features Commercial grade high-quality speakerphone LCD displays phone numbers, date and time Hands free (half duplex) Message Waiting Indication (FSK) 60 caller ID memories (caller list) Last 16 dialed numbers review and redial FSK/DTMF caller ID available 135 phone book entries Auto redial function LCD contrast adjustable Transfer function (R-key for use with a PABX) Mute function 16 melodies selectable for ringing Pause time 1
Button allocation Button allocation 1 LCD Display Displays the phone number, date and time and other information. 2 X / MENU a. Press to delete or edit the phone book and one-touch memories. b. Press for min. 3 secs to enter the main function settings. c. In main function settings press to enter and confirm the data. 3 Review incoming call list, select and scroll through settings 4 a. In on-hook status press for min. 3 secs to adjust the ringer volume. b.
Button allocation 6 /P a. In on-hook status press to review the outgoing number. b. In off-hook status press to dial the last dialed number. c. Insert a pause of 1.2 / 2.4 or 3.6 secs while editing the phone book or pre-dialing a number. 7 Press to mute the line (microphone mute). 8 a. Press for handsfree dialing and speak without lifting up the handset. b. Indicator will light up when the unit is in use (off-hook). c. Indicator will flash when the unit has a new call. d.
Installation Installation 1. Connect one end of the coil cord to the jack of the handset (15), connect the other end to the jack of the base unit. 2. Plug one end of the flat cable to the line jack (16) of this phone, plug the other end to the telephone wall socket. 3. Fit the stand supplied (as shown). Ensure the stand audibly clicks into place. The phone can be used with and without the stand.
Function Setup Function setup Every function setup is available by using just a single key. In on-hook status, press X/MENU for a minimum of 3 seconds to enter the function menu. Pressing the very same key X/MENU repeatedly will show the different functions available one after another. Please, refer to the list below for setting up each function. You may escape the setting menu going off-hook for a second. Set the Language In on-hook status, press and hold X/MENU for 3 seconds to enter LANGUAGE SETUP.
Function Setup Set the Ring Melodies After set up the EXT. NO., press X/MENU to access the RING MELODIES setup. Press to select the melody (1-16) and press X/MENU to confirm. Set the Ring Volume After set up the RING MELODIES, press X/MENU to access the RING VOLUME setup. Press to select the ring volume (1-8) and press X/MENU to confirm. Set Flash Time After set up the RING VOLUME, press X/MENU to enter the FLASH TIME setup.
Operation Operation Make a Call Pick up the handset or press to get dial tone and dial the number. Use X/MENU to edit the number. When the called party answers the phone, the LCD will time the call automatically. In pulse dialing mode it is possible to temporarely switch to DTMF (tone dialing) mode during a call pressing * . Afterwards dialing is in DTMF mode. Answer a Call Pick up the handset or press to answer the call. End a call Hang up the handset or press to end the call.
Operation Note: Please, check flash timing in case of problems. PABX setting usually is 100 ms while network providers may use 100 ms or 300 ms. Please, ask your network provider or PBX installer (in case this device is used behind a PABX) for the appropriate setting. Pre-dial In on-hook status, type in the phone number and then pick up the handset. The number will be dialed automatically. Pause Press / P for a break off of 1.2/2.4/3.6 seconds (depending on setting).
Operation Caller ID list Review In on-hook status, press time they called. to review the caller’s phone number and the Delete When you check the incoming calls, press to find the call you wish to delete. Press X/MENU once shortly to delete a single call. When you check the incoming calls, press to go to any call data. Press and hold X/MENU for 3 seconds to delete all calls.
Operation Dial from Phone Book In on-hook status, when reviewing the phone book and finding the number you wish to dial, press or pick up the handset to dial the stored phone number. Reset complete device back to factory settings In on-hook mode, press R for more than 8 seconds. This clears all memory (incl. Phone Book) and all settings. The device is back to initial factory setting after some seconds.
Appendix Appendix Troubleshooting If you have difficulties on your phone’s operation, the suggestions below should solve the problems: Problem Possible cause Solution/recommendation No display, no dial tone Connector cable not making contact. Check all cables and plug connections. Display too light or too dark. Contrast not set correctly. Adjust the contrast. No incoming calls being indicated in the telephone system. Check the programming of the telecommunication system. No call signal connected.
Appendix Power failure The internal clock stops if there is a power failure in the telephone network. All settings are retained however, meaning the settings stay as they were before when power is restored. All you need to do is reset the clock. Technical data Dimensions (W x H x D): 210 x 153 x 100 mm Weight: approx. 610 g Telephone cable: approx.
Appendix Guarantee Tiptel provides a voluntary guarantee on the device, the conditions of which are published on http://www.tiptel.com. The guarantee conditions applicable at the time of purchase apply. The original sales slip (receipt, bill) with serial number and/or IMEI number is used as proof of purchase. Please keep these documents in a safe place.
Tiptel.com GmbH Business Solutions Halskestraße 1 40880 Ratingen Deutschland Tel.: 0900 100–84 78 35* Vanity Tel.: 0900 100–TIPTEL* Internet: www.tiptel.de International: www.tiptel.com Tiptel GmbH Ricoweg 30/B1 2351 Wiener Neudorf Österreich Tel.: 02236 677 464-0 Fax: 02236 677 464-22 E-Mail: office@tiptel.at Internet: www.tiptel.at *(1,49 Euro/Min. aus dem Festnetz der Deutschen Telekom, abweichende Mobilfunkpreise möglich) Tiptel AG Bahnstrasse 46 8105 Regensdorf Schweiz/Suisse/Svizzera Tel.
