User Manual

16
E
N
G
L
I
S
H
XR1 Barrel Assembly
MP1 Barrel Assembly
Stryker Series Disassembly Instructions
Set up a workbench with plenty of workspace to make sure no small parts become lost.
Always wear eye protection when performing any marker disassembly or re-assembly. Refer
to the Parts Diagrams for these instructions.
• Follow Unloading Your Marker on page 10 and Air Cylinder Removal
instructions on page 14.
• Do not pressurize a partially assembled paintball marker.
Barrel and Shroud Assemblies
1. To remove the Barrel, simply unscrew the Barrel from the Body Assembly, and to
reinstall it, just turn it clockwise to thread it into the Body Assembly.
2. To disassemble the Front Grip/Shroud Assembly, refer to the appropriate image of
those that follow: