User Manual
E
N
G
L
I
S
H
TP04225 Rev. 11/14 17
Reinstalling the Valve into the Power Tube
1. Insert the Valve into the Power Tube.
2. Add teon tape or paste to the Gas Line Joint threads.
3. Slowly screw the Gas Line Joint into the Valve by hand, and then snug with a wrench.
Gryphon Marker Specications
Model ................................................................................................Gryphon and Gryphon FX
Caliber ...................................................................................................................................68
Action ............................................................................Semi-Automatic (open bolt blow-back)
Power/Air Supply ..................................................................compressed air, nitrogen, or CO2
Hopper Capacity ................................................................................................. 200 Paintballs
Ball Feed ........................................................................................................................Gravity
Cycle Rate ...................................................................................................8 shots per second
Standard Barrel Length .......................................................................................9.7” / 24.7 cm
Overall Length (with standard barrel, no cylinder) .............................................19.8” / 50.3 cm
Weight (without cylinder) ..........................................................................2.046 lbs. / 0.928 Kg
Effective Range ....................................................... Adjustable, typically 150+ ft. / 46+ mètres
Velocity: Always measure your marker’s velocity before playing paintball and never shoot at
velocities in excess of 300 feet per second (see instructions on page 9).