User Manual

4
3
1
2
Autococker
®
Barrel Adapter
Grip Cheek Assembly, Part Number TA35158
The new and improved grip cheek assembly provides easy and
tool less access to the inside of the grip frame including the battery.
You can now remove and install a battery without a tool whenever
needed. Press in on the pin shown (#1 arrow at right). This opens up
the left side of the Grip Cheek enough for you to grab hold of it (#2
arrow). Gently pull until the entire left side of the Grip Cheek opens to
allow battery access. Line up the button heads with the grip mounting
holes and push in on the left side Grip Cheek to close it.
Shortened Foregrip, Part Number TA35155
We listen to player feedback! We shortened the foregrip on the XVR
compared to the original Crossover foregrip.
Barrel Adapter for Autococker
®
threads, Part Number TA35149
An adapter is included with the XVR that will allow the player to use an
Autococker threaded barrel system, if desired.
Two Piece Barrel with .692” Barrel Back
The XVR comes with a two piece ported barrel system composed of a barrel back and barrel
front. The marker comes standard with the 0.692” barrel back. Additional backs with diameters
of 0.688”, 0.684” and 0.680” can be purchased separately from Tippmann, or get all three in
the Barrel Kit T235005.
Item Qty Part No. Description
1 1 TA35150 Barrel Front
2 1 TA35156 Barrel O-Ring
3 1 TA35154 .692” Barrel Back
T235005 Kit including all items below
1 1 TA35150 Barrel Front
2 1 TA35156 Barrel O-Ring
3 1 TA35151 .680” Barrel Back
3 1 TA35152 .684” Barrel Back
3 1 TA35153 .688” Barrel Back
1
2