TIPPMANN A-5 A-5 A-5 A-5 A-5 TM A-5 STEALTH CR-15 TM TM TM TM TM A-5 WITH E-GRIP TIPPMANN A-5 MARKERS TM Owner’s Manual Manual del Usuario Le Manuel du Propriétaire A-5 RESPONSE STEALTH WITH E-GRIP STEALTH CR-15 TM TM TM TM TM Owner’s Manual Manual del Usuario Le Manuel du Propriétaire TM TM TM TM TM A-5 RESPONSE TM TM A-5 STEALTH TM TM PN# TP04100 Date: 6/05
WARNING WARNING E N G L I S H THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE, FACE AND EAR PROTECTION DESIGNED FOR PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. WE RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION WHEN USING THIS PRODUCT. READ THE OWNER’S MANUAL BEFORE USING THIS PRODUCT. E S P A Ñ O L ESTO NO ES UN JUGUETE. UN USO INAPROPIADO PUEDE CAUSAR SERIAS HERIDAS O MUERTE.
TIPPMANN TM WARNING E N G L I S H THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. EYE, FACE AND EAR PROTECTION DESIGNED FOR PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. WE RECOMMEND AT LEAST 18 YEARS OLD TO PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION WHEN USING THIS PRODUCT. READ THE OWNER’S MANUAL BEFORE USING THIS PRODUCT. 2955 Adams Center Road, Fort Wayne, IN 46803 USA P) 260-749-6022 • F) 260-749-6619 www.tippmann.
Safety Is Your Responsibility (continued from page 4) Warning/Liability Statement E N G L I S H This marker is classified as a dangerous weapon and is surrendered by Tippmann Sports, LLC with the understanding that the purchaser assumes all liability resulting from unsafe handling or any action that constitutes a violation of any applicable laws or regulations.
Safety Is Your Responsibility (continued from page 5) E N G L I S H • • • • • • Getting Started (continued from page 6) Even a light layer will absorb some of the impact and protect you from the paintballs. Keep exposed skin away from escaping gas when installing or removing air supply cylinder or if the marker or air supply is leaking. Compressed air, CO2, and nitrogen gasses are very cold and can cause frostbite under certain conditions. Use only .
TM E-GRIP Battery Installation Instructions (continued from page 8) TM E-GRIP - Battery Installation or Replacement E N G L I S H STEP 1 - Getting Started: (9 volt battery not included) 1)Before installing air supply, install 9 volt battery as follows: Battery Replacement: First follow unloading and air supply removal instructions on page 16 and never disassemble a marker that is under pressure. 2) Remove lower receiver as outlined in Receiver Disassembly on page 17.
TM TM E-GRIP Tuning and Operating Instructions E-GRIP -Troubleshooting Familiarize yourself with and follow these instructions to select Problem: If you pull the trigger and marker does not fire. 1) Check to be sure safety is off. 2) Make sure sufficient air supply is hooked up to marker. 3) Firing Mode may be set to “= NO OPERATION”. With screw driver, turn Mode adjustment, access through top hole in lower receiver, 1 position (click) try trigger again.
TM E N G L I S H Tuning The Response Trigger Rate of Fire Model Specifications With a screwdriver, adjust the Flow Control Valve Model Basic .......................................... TIPPMANNTM A-5TM Caliber .............................................................................. .68 Action ....................... Semi-Automatic (open bolt blow-back) Power/Air Supply .. compressed air, nitrogen or CO2 cylinder Hopper Capacity ................................................
• A-5 A-5 • A-5 Parts List E TM TM TM N G L I S H E-Grip Parts (page 11) • A-5 Response Parts (page 12) Stealth CR-15 Parts (pages 12-13) • Stealth Parts (page 13) TM TM TM TM TM WARNING DO NOT FIELD STRIP OR OTHERWISE DISASSEMBLE THIS MARKER WHILE IT IS PRESSURIZED WITH AIR. TIPPMANN TM 1-800-533-4831 www.tippmann.
Unloading Your Marker Cleaning and Maintenance (continued from page 16) To unload your marker remove the hopper or completely empty the hopper. Then, point your marker in a safe direction and fire several times to be sure there are no balls lodged in the chamber and / or barrel. Install barrel sleeve (see page 2). IMPORTANT: Do not uncock your marker as uncocking your marker may push a ball into the chamber or down into the barrel in which case the ball will be hidden from view.
Field Stripping / Receiver Disassembly (continued from page 17) E N G L I S H FIRST: Remove air supply before any disassembly: Unload marker, remove the air supply as outlined on page 16 and put the marker in the uncocked position before beginning to field strip it. To uncock the marker, hold the bolt cocking handle back - then pull the trigger and release handle forward which will uncock the marker.
Upper Receiver Assembly (continued from page 20) Upper Receiver Assembly E N G L I S H TM How to reinsert upper receiver internal parts and put two upper receiver halves together. 1) Make sure all parts are clean before reassembling. Place right upper receiver half flat with Tombstone Latch & Spring, Front Grip Nut, and Ball Latch in position as shown below. a) & b) For Response & CR-15 Markers only: You must next place two parts a & b on left receiver half before assembling receiver halves.
Male Female Phone # Country Zip State City Zip Age Date Email Address Your Name (print) Country 22 TIPPMANN Before storage unload and remove air supply (see page 16). Then install Barrel Sleeve (see page 2) and put your marker in Safe Mode (see page 4). You should store your marker in a dry area. Before storing your marker make sure that the marker is cleaned and oiled (see cleaning and maintenance on page 16) so that it does not rust.
TIPPMANN 2955 ADAMS CENTER ROAD FT. WAYNE, IN 46803 USA TM Hombre Mujer Femelle Mâle Registro de Garantia via On line a www.tippmann.com o complete esta tarjeta de garantía y envandola por correo regular aTippmann. L’Insription de Garantie sur l’internet à www.tippmann.com ou complétez la carte de d’inscription et l’envoyez à Tippmann.
