Data Sheet

www.tinysine.com/www.tinyosshop.com
Step 1: Wiring
In this manual, we use self-power mode to demonstrate.
First, you will need a wire that has a two-pin plug and a bulb with two polar ends that has
been leaded like we have shown below.
Connect the wire to LazyBone’s AC input port: connect the live wire to the ‘L’ port and the
zero line to the ‘N’ port.
The output has three ports. The one named “N” is a common port; please wire one polar
end of the bulb to this port. The other two ports have an opened switch and closed switch
logo respectively. The opened switch port is normal OFF, The another one is normal ON.
(Please do this with the wire, bulb and LazyBone powered off to keep you safe!)
Finally, connect the 2 pin plug to AC power, and the red LED light near the AC input port
will lights up. This step works for all versions of LazyBone!
Step 2: Connect LazyBone with your Smartphone
Bluetooth Lazybone
LazyBone V5 (Bluetooth version) uses Bluetooth BLE instead of the traditional Bluetooth
module. LazyBone V5 can be controlled by both Android phones and iOS devices!
1. Connect with phones
(1) Download Android APP (Bluetooth) or iPhone APP(Bluetooth) and install it to your