Data Sheet

www.tinysine.com/www.tinyosshop.com
Module Overview
1. Setting Switch
LazyBone V5 has 3 setting switches: AP, P/R, P/E.

AP: WiFi AP mode ON/OFF
This is for WiFi version use only. You can configure the WiFi module or control it
point-to-point in AP mode.

P/R: Password reset.
Power off LazyBone, set the P/R switch to position ON, then re-power LazyBone. Set P/R
back to OFF, wait for 3 seconds, the password will be reset to default password 123456.

P/E: Password enable/disable.
This switch is used to enable/disable LazyBone’s password function. Set to “ON”, enable
the password; set to “OFF”, disable the password, this operation needs you to re-power
the board.