Data Sheet

www.tinysine.com/www.tinyosshop.com
Here we set IP address to 192.168.3.185 for demo purposes.
(6) When the configuration has finished, close Hyper Terminal, disconnect LazyBone from
its power, change AP back to “OFF”, and re-power LazyBone again.
2. Connect LazyBone to Android phone/iPhone
(1) Open the app, click Connect Device to Add new devices. Input the configuration
information as we have set before. You can input a name for LazyBone in the first line.
The second line is the module’s IP address, which in our case we write 192.168.3.185,
and the third is the port, which we set to 2000, then click “ok”.