Datasheet

www.tinysine.com
21
because BLE devices don’t need the pair code. After TOSR14x has connected to iPhone,
you will see the name from the top. Also, you need to input the correct password to
access the board.
3. Control TOSR14x
After your phone has connected to TOSR14x, you can control the board just as we
control it in USB mode.
(1) Slide “Momentary/Normal” button to choose the working mode.
(2) “All On” and “All Off” button only works under Normal mode..
(3) If you connect a DS18B20 sensor to temperature input port, you will get the real-time
temperature from the screen(NC means no ds18b20 connected).
(4) Click “Setting” in menu, you can even change relay buttons’ name, maximum length
is 6 characters.