Datasheet

www.tinysine.com

NTRODUCTION

TOSR14x is an upgraded version of TOSR04. It supports password. It can be set to

latching or momentary outputs. TOSR14x allows computer control switching of external

devices by using the USB port of your computer. It also has a wireless extension port,

can works with Xbee or BluetoothBee or WiFibee Module, So you can control your device

via zigbee or Bluetooth or WiFi!

The TOSR14x provides four volt free contact relay outputs with a current rating of up to

10Amp each. one DS18B20 temperature sensor port. The module is powered from a

5VDC power supply(or USB). The DC input jack is 2.1mm with positive core polarity, The

relays are SPDT types.

PECIFICATIONS



Rated voltage:DC 5V



Power Mode:USB/DC 5V



Baud rate:9600



Temperature input port



Number of Relays:4



Relay switching power:10A 250VAC

 Latching or momentary outputs



Password supported



Communication Mode:USB/XBee/Bluetooth/WiFi

IMPORTANT DISCLAIMER

This device connects to the USB port of your computer and can be used to control

external devices connected to its onboard relays. Incorrect wiring or shorts on the board

can potentially cause damage to the controller itself,your computer's USB controller

and/or your computer's motherboard if an external voltage make its way to the USB bus

or the USB port is shorted. Extreme care must be taken when using this device to avoid

any damage to your equipment. In particular,make sure you always disconnect the

device from the USB port as well as any other power source when working on the device.

TinySine Electronics,it's shareholder,employees,suppliers,distributors and/or resellers are

not liable for any damage or loss of data as a result of the use of this device, including

special,incidental,or consequential damages resulting from the use of this device,or

under any legal theory,including lost profits,downtime,goodwill,damage to or replacement