Datasheet

www.tinysine.com
LazyBone V2 (WiFi version)
LazyBone V2 (WiFi version) contains a RN171 module. You will need to configure the
WiFi module according to your network before you can use it.
1. There are two methods to configure your LazyBone:
The first method is to use Hyper Terminal in Windows to configure LazyBone:
(1) Disconnect LazyBone from AC power, set configuration switch to “Config” position,
and then power your LazyBone again.
(2) Once LazyBone is powered, it will create an AP network.
(3) Set your computer to obtain IP address automatically and open your network list. You
should see a new wireless network named Wifly-EZX-XX (AP mode). Click the
Wifly-EZX-XX to connect, which is an open network that does not need a pass phrase or
pass key. XX stands for the last two characters of the WiFi module’s MAC address.