Datasheet

www.tinysine.com
Connect the wire to LazyBone’s AC input port: connect the live wire to the AC port named
“L” and the zero line to the port named “N”.
The output has three ports. The one named “N” is a common port; please wire one polar
end of the bulb to this port. The last two ports have an opened switch and closed switch
signal respectively; choose the opened switch port keep your bulb off, or choose the
closed switch to keep the bulb on. (Please do this with the wire, bulb and LazyBone
powered off to keep you safe!)
Finally, connect the 2 pin plug to AC power, and the yellow LED light near the AC input
port will light up. This step works for all versions of LazyBone!
Step 2: Connect LazyBone to your Smartphone
LazyBone V3 (Bluetooth dual mode version)
LazyBone V3 uses a dual Bluetooth module instead of a traditional Bluetooth module.
This module supports both EDR and BLE, which means that V3 can be controlled by both
Android phones and iOS devices!
1. Connect with Android Phones
(1) Download the Android Application (Bluetooth Version) here and install it to your
android phone.
(2) Open your phone’s Bluetooth and the app
(3) Click menu key on your phone → Connect device → Scan for devices. Your phone
will search for the Bluetooth module automatically. The Bluetooth module usually comes
with a name “LazyBone-E”.