Datasheet

www.tinysine.com
If your computer has both wireless and wired interface hardware, please disable the
wired LAN interface hardware before connecting to the AP network, or the computer may
assign an IP address that is not on the same subnet as the WiFi module.
(4) Run Hyper Terminal and create a new connection.
Connect to the LazyBone WiFi module on port 2000 and 1.2.3.4 2000
(5) Once connected with a proper IP address, you should see the response *HELLO*.
Input escape sequence $$$ to make the WiFi module enter commands mode, and Hyper
Terminal should return CMD to you.
(6)Now you can setup the WiFi module’s settings. Input every command on your
keyboard, and click the Enter button after each command to send. The Hyper Terminal