Manualshelf

Data Sheet

ManualsBrandsTinysine Electronics ManualsBluetoothSerial Bluetooth 4.0 BLE Module - iBeacon
12345678910
www.tinysine.com
14. Query/Set baud rate
Send
Receive
Parameter
AT+BAUD?
OK+Get:[para]
para: 0~8
0: 9600
1: 19200
2: 38400
3: 57600
4: 115200
5: 4800
6: 2400
7: 1200
8: 230400
Default: 0(9600)
AT+BAUD[para]
OK+Set:[para]
Need to re-power module.
e.g.
Query baud rate:
Send: AT+BAUD?
Receive: OK+Get:0
Set baud rate to 19200:
Send: AT+BAUD1
Receive: OK+Set:1
Note: If set baud rate to 7(1200), after next power on, module will not support any AT
commands, until PIO0 is pressed, then module will change baud rate to 9600.