Data Sheet

www.tinysine.com
Default: 0
Added since V521 version. Please execute AT+FILT0 first.
64. Query/Set sensor type on module PIO11(HM- 11 is PIO3)
Send
Receive
Parameter
AT+SENS?
OK+Get:[para]
para: 0, 1, 2
0: None
1: DHT11
2: DS18B20
Default: 0
AT+SENS[para]
OK+Set:[para]
Note: This command is only used for HMSensor.
65. Query/Set Stop bit
Send
Receive
Parameter
AT+STOP?
OK+Get:[para]
None
AT+STOP[para]
OK+Set:[para]
para:0, 1
0: One stop bit
1: Two stop bit
Default: 0
Need to re-power module.
66. Work immediately
Send
Receive
Parameter
AT+START
OK+START
None
This command is only used when AT+IMME1 is setup.
67. Query Module into sleep mode
Send
Receive
Parameter
AT+SLEEP
OK+SLEEP
None
Only support Peripheral role.