Data Sheet

www.tinysine.com
43. Query/Set Module iBeacon minor
Send
Receive
Parameter
AT+MINO?
OK+Get:[para]
para: 0x0001~0xFFFE
Default: 0x FFE1
AT+MINO[para]
OK+Set:[para]
Added since V517 version.
e.g.
Set Minor to 0x0102
Send: AT+MINO0x0102
If all is okay, module will send back OK+Set:0x0102
44. Query/Set Module iBeacon Measured power
Send
Receive
Parameter
AT+MEA??
OK+Get:[para]
para: 0x00~0xFF
Default: 0xC5
AT+MEA[para]
OK+Set:[para]
Added since V519 version.
45. Query/Set Module Work Mode
Send
Receive
Parameter
AT+MODE?
OK+Get:[para]
para: 0, 1, 2
0: Transmission Mode
1: Transmission Mode +
PIO Collection Mode
2: Transmission Mode +
Remote Control
Default: 0
AT+MODE[para]
OK+Set:[para]
Mode 0:
Before establishing a connection, you can use the AT command configuration module
through UART.
After established a connection, you can send data to remote side from
each other.
Mode 1:
Before establishing a connection, you can use the AT command configuration module
through UART.
After established a connection, you can send data to remote side. Remote side can do
fellows: