Data Sheet

www.tinyosshop.com
If you want two Bluetooth Bee work together. One of it must be set as Master and the
other one be Slave.The 2 modules must have same pair number(default :1234) and Baud
rate setting.
Step1:Set one Bluetooth Bee as Master
Turn on AT switch and then power on the module to entering AT mode and send AT
command.
AT Command:
AT+CMODE=1
AT+ROLE=1
Step2:Bluetooth Bee automatic binding
Turn off Master module AT switch and Power two Bluetooth Bees.They will automatic
binding and in transparent data mode.STATE LED will light on.
Step3:transparent data test
All 2 Bluetooth Bees stack on Xbee adapter and connected with PC. You will find 2 Com
ports in Device Manager.