IDENTIFY INSTALLATION TYPE ww Wn Sea STEELY vases EXTERNALLY WIRED ‘The bulb can be accessed from the back of the housing without removing any caps or covers. Wiring for the ‘bulb is visible and accessible outside of the housing. INTERNALLY WIRED INSIDE COVER ‘To access the bulb a dust cap (generally plastic) must first be removed. Inside of the bulb housing there is wiring going to the bulb with plenty of space inside of the housing to fit the decoder harness.
STEP Simply connect the decoder plugs to the LED bulb and the factory bulb harness. 7 enn ENGINE BAY STEP 2 Secure the metal control box of the decoder harness with the mounting tape or cable tie provided. Any existing holes for fasteners inside the engine bay may also be used.
a ne STEP Remove the dust cover from the bulb housing. STEP 2 Connect the decoder plugs to the LED bulb and the factory bulb harness. pins, | vhf) =e EE BY STEP Secure the decoder harness to the inside of the bulb housing. To optimize the heat dissipation of the LED bulb, try to secure the decoder control box away from. the LED bulb and the LED driver to avoid excess heat accumulation. Reinstall the dust cover.
STEP Remove the dust cover from the bulb housing. Drill a 1” hole in the center of the dust cover. Use the rubber grommet. on the decoder harness wiring loom to seal the hole. STEP 2 fue Connect the decoder plugs to the LED bulb and the factory bulb harness. Reinstall the dust cover. STEP Secure the metal control box of the decoder harness with the mounting tape or cable tie provided. Any existing holes inside the engine bay may also be used.
Our Tiny Monster bulbs pack scary parer in slim, sleek designs. They're compact and powerful and packed with the latest LED technology. Poe Lightly one circumvent NO MORE ERRORS OR FLICKERING. Tiny Monster decoder harnesses do it all They're designed to handle both Can bus and PWM systems used in the newest vehicles. Our decoders provide a plug & play solution to any LED bulb and fog light conversion.
THANK YOU! Thank you for purchasing ARC Lighting products. Read this instruction manual thoroughly for proper use of the product. After completing your installation, please keep this manual for future reference.
WARRANTY Terms of this Warranty ARC Lighting warranties all products from defects in material and workmanship for (2) two years from the retail date of purchase. This warranty applies only to the original purchaser and is non transferable. Your original sales receipt will serve as proof of purchase for this warranty. Before credit can be issued on a warranty claim, proof of defect may be required. This can be determined at the time of the claim.
