Users Manual Part 2

EN
12
• A red dust monitoring loop indicates more dust
is detected whereas a blue loop indicates less
is detected. This mode automatically provides
the best cleaning solution.
Fig.D-4
MAX Mode
• In AUTO mode, press the
AUTO
MAX
button to enter
MAX mode.
• In MAX mode, the iLoop only displays the dirty
amount, and the suction power keeps at the
maximum.
Fig.D-5
Note:
Keep sharp objects away from the digital display
screen to avoid scratches and scrapes.
App
All the functions can be performed using the
Tineco app. Download the Tineco app from the
App Store, Google Play and Tineco Ofcial Site.
www.tineco.com
App
Downloads
Support
App Downloads
Tineco
Download on the
App Store
GET IT ON
Google Play
Turn On/Off WiFi
• Turn on WiFi: Long press the
AUTO
MAX
button for
3 seconds and connect to network.
• Turn off WiFi: Long press the
AUTO
MAX
button for
20 seconds to turn off.
Emptying the Dustbin
1.With the power off, push down the dust empty
tab to clean the dustbin. If too much dust
causes a blockage, press the release button on
the dustbin and empty the contents.
Fig.D-6
2.Close and click the dustbin ap back into
place.
Fig.D-7
Charging the Battery
1.Plug the adaptor into the charging port at the
bottom of the dock.
Fig.D-8
2.Place the appliance on the charging dock and
plug the adaptor into a wall outlet.
Fig.D-9
Warning:
• Only use the Tineco-provided adaptor to
charge the appliance.
• To avoid trip hazards, please place the
appliance securely on the charging dock, near
a wall during charging.
• During long periods of not being used, store
the appliance in a cool, dry place. Ensure the
battery is fully charged every 3 months.
• Do not expose appliance to sunlight or
freezing temperature.
• Recommended temperature range: 39.2°F
(4°C)~104°F (40°C).
Runtime
• When in AUTO mode, the runtime is
approximately 40 minutes. When MAX power is
used, the runtime is approximately 10 minutes.
• Estimated runtime data was obtained by a
Tineco Laboratory using one battery and non-
motorized accessories.
Charging Time
• A full charge takes approximately 3-4 hours.
• Estimated data was obtained by a Tineco
Laboratory using ambient temperatures
between 39.2°F (4°C) to 104°F (40°C).