Instruction Manual

EN
20
Pre-lter
Ensure the appliance is switched off before
cleaning, and remove the dirty pre-lter from
the mesh lter-holder.
Do not turn the appliance upside down when
removing or installing the lter to prevent dust
from entering the motor.
Replace a clean lter to the main body. Put
the dirty pre-lter into the cleaning tool and
connect the cleaning tool to the main body.
Activate the suction to clean the pre-lter. The
appliance will automatically switch off after once
cleaning is completed. Retain the clean pre-lter
as a spare which can be reused.
HEPA Filter
Press the HEPA release button and gently
remove for cleaning. Do not use the appliance
without rst installing the HEPA lter.
Do not place the appliance as above when
removing or installing the HEPA lter, to prevent
dust from entering the motor.