SERIES Smart Cordless Hard Floor Cleaner Bedienungsanleitung Instruction Manual Manual De Uso Mode D’emploi Manuale D’istruzioni
CONTENTS Overview............................................................................................... 28 Accessories.......................................................................................... 30 Assembly.............................................................................................. 31 Operation............................................................................................. 32 Maintenance....................................................................
Important Safety Instructions SAVE THESE INSTRUCTIONS Household use only. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. EN WARNING – To reduce the risk of fire, electric shock, or injury: 1. Use only indoors, on non-carpeted floor surfaces such as vinyl, tile, sealed wood, etc.
Range of Usage 1. The cordless hard floor cleaner is to be used on indoor hard floors, such as vinyl, tile, sealed wood, etc. Use on a rough surface may not get the best performance. 2. Keep your appliance away from heat sources, such as fireplace or heater, to avoid casing deformation. 3. Do not use to pick up flammable or combustible liquids, ultrafine particles, sharp objects, hazardous material, chemicals or anything that is burning or smoking, as described above. 25 EN 17.
About Cleaning Solution 1. A large amount of cleaning solution entering into the motor may cause damage to the appliance. 2. Add solution as instructed in the Operation section. We recommend using the provided cleaning solution. Do not use the product with acidic, alkaline solution, or any substances harmful to the environment. 3. Keep out of reach of children. If any solution gets into the eyes, immediately flush them with clean water.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Note The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment, such modifications could void the user’s authority to operate this equipment.
Overview A Q B C J R S K E L F M G N EN D T U O H V P I A. Self-cleaning Button L. Clean Water Tank (CWT) B. AUTO/MAX M. Dirty Water Tank (DWT) C. Power On/Off N. Floater D. Digital Display O. Brush Roller Cover E. Clean Water Tank Release P. Brush Roller F. Clean Water Tank Handle Q. Deodorizing & Cleaning Solution G. Dirty Water Tank Release R. 3-in-1 Cleaning Tool H. Dirty Water Tank Handle S. HEPA Filter & HEPA Holder I. Brush Roller Cover Release T.
EN Digital Display A B C D E F G H I A. Self-cleaning Icon F. CWT Empty B. Brush Roller Tangled Indicator G. Power Indicator C. Dirt Monitoring Loop H. Tineco Logo (Blue to red according to the dirt amount) J I. WiFi Indicator J. Battery Level Indicator D. AUTO Mode E.
Accessories Note: Accessories may vary between markets. If you require other accessories, please make a purchase on the Tineco official website. BUY ONLINE www.tineco.com Products Parts and Accessories Buy Now EN Deodorizing & Cleaning Solution Removes dirt, grime, grease and tough stains from most types of hard surfaces, like tile, marble, sealed hardwood floors, and more. Always use Tineco solution in your appliance. Add one bottle cap of solution to each full tank of clean water.
Assembly How to Assemble/Disassemble Note: EN For water tank and brush assembly, please refer to “Operation” and “Maintenance”. click To assemble the handle, insert it into the appliance until you hear a click. In the event that the product must be returned, please disassemble the handle. Press the spring to release the handle with a tool (like a screwdriver) and lift the released handle from the appliance.
Operation Preparing for Use Before first use, please charge the appliance for 4±0.5 hours (refer to “Charging Instructions” for details). * Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C). EN AUTO MAX <142° Press the button and the appliance will start in AUTO mode by default. Press it again to turn off the appliance. Switch between AUTO and MAX mode by pressing the AUTO MAX button. Do not recline the appliance more than 142° to protect against water leakage.
Filling Clean Water Tank MAX Open the tank cap, and fill with tap water to the Max line. When deep cleaning is necessary, add one bottle cap of solution to the CWT and tightly close the cap. Note: ② Only use water under 140F°/60C°. DO NOT USE HOT WATER. click ① Place the tank back into the appliance. You should hear a “Click” if done correctly. Charging Instructions To charge the appliance, place the appliance on the charging base and plug the adaptor into a power outlet. 1.
Cleaning Mode Selection AUTO Mode • In AUTO mode, the iLoop™ sensor automatically detects how dirty the floor is and applies the appropriate amount of detergent and suction power. • A red dirt monitoring loop indicates more dirt is detected, and a blue loop indicates less dirt is detected. This mode automatically provides the best cleaning solution.
Runtime • When in AUTO mode, the runtime is approximately 35 minutes. When MAX power is used, the runtime is approximately 25 minutes. • Estimated runtime data was obtained by a Tineco Laboratory. Charging Time • A full charge takes approximately 4±0.5 hours. • Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C). Indicator EN When in Use Battery level ≥ 10%: battery indicator will be illuminated.
Blinking: WiFi is connecting. Off: WiFi is not connected, please connect to the network. Indicator blinking: appliance is in need of self-cleaning. EN During Charging Tineco indicator: blinking. Fully Charged In 5 minutes: Tineco indicator illuminated. After 5 minutes: all indicator lights turn off. App All the functions can be performed using the Tineco app. Download the Tineco app from the App Store, Google Play and Tineco Official Site.
