FLOOR ONE S3 SERIES Smart Cordless Vacuum & Washer Instruction Manual Manual De Uso Mode D’emploi *Actual product may differ from illustration. TINECO IS HERE TO HELP. We’ll get back to you within 1 business day. www.tineco.com 1-855-292-8864 Mon. - Fri.
EN CONTENTS Important Safety Instructions................................................................ 2 Specifications......................................................................................... 6 Overview................................................................................................. 7 Assembly................................................................................................ 9 Operation.........................................................................
EN Important Safety Instructions SAVE THESE INSTRUCTIONS Household use only. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING – To reduce the risk of fire, electric shock, or injury: 1.
3 EN 16. Recharge only with the charger specified by Tineco. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 17. Use appliances only with specifically designated Tineco battery packs. Use of any other battery packs may create a risk of injury and fire. 18. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water.
EN 38. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. 39. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Range of Usage 1. The cordless hard floor cleaner is to be used on indoor hard floors, such as vinyl, tile, sealed wood, etc. Use on a rough surface may not get the best performance. 2.
Note: This equipment has been tested and found to comply with the limits for a Class B digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EN Specifications Product FLOOR ONE S3 SERIES AC Input 100-240V~ Voltage 21.6V Rated Power 190 W Running Time ≥35 mins Charging Time ~5 hrs Water Flow Rate 30~100ml per min CWT Capacity 0.6L DWT Capacity 0.5L Waterproof IPX4 WiFi Frequency Bands 2.4G WiFi Maximum Output Power 19dBm 4000mAh Lion Only use the Tineco provided adaptor: KL-WA260080-A3 or YLS0241A-T260080.
Note: Accessories may vary between markets. If you require more accessories, please go to www.tineco.com or store.tineco.com. A Q B C J R D K E L F M S T N G O H P I U A. Self-cleaning Button L. Clean Water Tank (CWT) B. AUTO/MAX M. Dirty Water Tank (DWT) C. Power On/Off N. Floater D. Digital Display O. Brush Roller Cover E. Clean Water Tank Release P. Brush Roller F. Clean Water Tank Handle Q. Deodorizing & Cleaning Solution G. Dirty Water Tank Release R. Cleaning Tool H.
EN Digital Display A B C D E F G H A. Self-cleaning Icon E. CWT Empty B. Brush Roller Tangled Indicator F. Power Indicator C. Dirt Monitoring Loop G. Tineco Logo (Blue to red according to the dirt amount) I H. WiFi Indicator I. Battery Level Indicator D.
Assembly EN How to Assemble/Disassemble Note: For water tank and brush assembly, please refer to “Operation” and “Maintenance”. click To assemble the handle, insert it into the appliance until you hear a “Click”. In the event that the handle need to be disassembled, press the spring to release the handle with a tool (like a screwdriver) and lift the released handle from the appliance.
EN Operation Preparing for Use Before first use, please charge the appliance for 5 hours (refer to “Charging Instructions” for details). * Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C). AUTO MAX Tips: Press the button and the appliance will start in AUTO mode by default. Press it again to turn off the appliance. Switch between AUTO and MAX mode by pressing the AUTO MAX button. • Solution mode/ Water Only mode: Appliance starts with Solution mode by default.
EN Filling Clean Water Tank MAX Press the Clean Water Tank release button to remove it from the appliance. Open the tank cap, and fill with tap water to the Max line. When deep cleaning is necessary, add one bottle cap of solution to the CWT and tightly close the cap. Note: ② Only use water under 140°F/60°C. DO NOT USE HOT WATER. click ① Place the tank back into the appliance. You should hear a “Click” if done correctly.
Cleaning Mode Selection EN AUTO Mode • In AUTO mode, the iLoop™ sensor automatically detects how dirty the floor is and applies the appropriate amount of detergent and suction power. • A red dirt monitoring loop indicates more dirt is detected, and a blue loop indicates less dirt is detected. This mode automatically provides the best cleaning solution.
• A full charge takes approximately 5 hours. • Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C). Indicator When in Use Battery level ≥ 10%: battery indicator will be illuminated. Battery level < 10%: battery indicator will be blinking. Off: no power detected or possible battery malfunction. Solid red light: dirt sensor malfunction or blocked. Indicator blinking: CWT is empty.
EN Off: WiFi is not connected, please connect to the network. Indicator blinking: appliance is in need of self-cleaning. During Charging Tineco indicator: blinking. Fully Charged In 5 minutes: Tineco indicator illuminated. After 5 minutes: all indicator lights turn off. App All the functions can be performed using the Tineco app. Download the Tineco app from the App Store, Google Play and Tineco Official Site. App Downloads Download on the App Store GET IT ON Google Play Tineco www.tineco.
Status Reminder Battery level: 10~20% Low battery Battery level: 0~10% Low battery, please charge WiFi network connected Network connected Clean Water Tank is empty Clean Water Tank empty, please refill water and cleaning solution Dirty sensor Please begin self-cleaning cycle Dirty dry filter Please clean the filter in Dirty Water Tank Brush roller is tangled Please clean the brush roller Brush roller not installed Please install the brush roller correctly Too much wear of brush roller Pl
EN Maintenance Note: • For optimal performance and to prevent odors, always clean and dry DWT, floater, filters, brush roller, brush roller cover completely after each use. • Please make sure each part is installed correctly or the appliance may not work properly. • After maintenance, place the appliance on the storage tray vertically. Do not expose the appliance to direct sunlight, and store it indoors in a dry place.