(User Manual-Control box) User manual-Control Box TC16P series 1/6 2019.8.
(User Manual-Control box) General Information: Contact Information: TiMOTION Technology Co., Ltd. Shiyong Minyin Industrial Zone, Hengli Town, Dongguan, China, 523460 Symbol Descriptions The following symbols may appear in this manual, on the label, or on its accessories. Some of the symbols represent standards and compliances associated with the Control box and its use.
(User Manual-Control box) Warning: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Please read this user manual carefully before use. You must be connected to the correct mains. For any accessories connected to this control box, the plug type, pins definition and electrical character must comply with its specifications. Use only approved equipment. Do not use cables, handsets, actuators, or optional equipment other than those specified by T-motion to function improperly.
(User Manual-Control box) However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
(User Manual-Control box) Model No.: Model list: Model Input Max. Output (Actuator) TC16P-QZ120C 100-240VAC,50/60Hz,4A 32Vdc,10A TC16P-QZ120 100-240VAC,50/60Hz,4A 32Vdc,10A Degree of protection against electric shock: Protection against ingress of water: Mode of operation: No applied part IP20 Intermittent operation This control box is designed to be used on motorized furniture and its basic function is to control the movement of up to 2 electro-mechanical actuators.
(User Manual-Control box) Maintain & Cleaning: - The control box is a maintain-free device. Under normal conditions, maintain is not necessary. - For some applications that not all DC Output (Actuator) connectors are used, the rubber inserts are needed to seal those connectors which are not used. If these connectors are not well sealed, the water/steam used in washing and cleaning may flow into the control box which will cause unexpected damage to the control box. 6/6 2019.8.
