Operation Manual

21
REVIEW, EDIT, AND RESET ODOMETER VALUES
The odometer displays the total distance you have traveled since the odometer was reset
1. PressMODEuntilREVIEWdisplays.
2. PressUPorDOWNuntilODOMETERdisplays.
3. PressMENU.TheODOMETERsubmenudisplays.
4. ToedittheOdometer:
a.PressUPtoselectEDIT,andthenpressSELECT.
b.PressUPorDOWNtochangetheblinkingthevalue,andthenpressNEXTtomovetothenextvalue.
c.PressDONE.
5. ToresettheOdometer:
a.OntheODOMETERsubmenu,pressDOWNtoselectRESET,andthenpressSELECT.
b.PressUPorDOWNtoselectYES,andthenpressSELECT.
c.PressDONE.
LOCK AND UNLOCK WORKOUTS
Onceyouhavethespecicworkoutselectedforreview,youcanlockorunlockit.
Lockworkoutstokeepthemfrombeingoverwrittenbynewworkouts.
Iftheworkoutisunlocked,youwillseeaLOCKoptiononthereviewmenufortheworkout.Iftheworkoutis
locked,thisoptionwillreadUNLOCK.
NOTE: Youcannotdeleteindividualworkoutsmanually.Workoutsareonlyremovedwhenoverwrittenbya
newer one. All workouts are removed if the watch is reset.
1. PressMODEuntilREVIEWdisplays.
Thewatchdisplaysthenumberofstoredworkoutsavailableforreview.Ifnoworkoutshavebeensaved,
NOWORKOUTdisplays.
2. IftheOdometerisdisplayed,pressUPorDOWN.
3. PressMENU.TheWORKOUTSmenudisplayswithalistofdatesthathadworkoutssaved.
4. PressUPorDOWNtoselectthedate,andthenpressSELECT.Alistofworkout(s)withtheworkouttimeand
type(CHRforChrono,INTforIntervalTimer,andTMRforTimer)fortheselecteddatedisplays.Thegraphic
belowdisplaysthelistofworkoutsforTODAY.
5. PressUPorDOWNtoselecttheworkout,andthenpressSELECT.
6. PressDOWNtoselectLOCKorUNLOCK,andthenpressSELECT.
7. PressUPorDOWNtoselectYES,andthenpressSELECT.
8. PressDONE.
NOTE:Youcannotlockaworkoutinprogress.TheLOCKoptiononlyappearsiftheworkouthasbeensaved
and reset.
DOWNLOAD DATA USING COMPUTER SOFTWARE
Thetwo-waywiredcommunicationbetweenthewatchandcomputerenablesyoutodownloaddatafromthe
watch to the computer.
1. ConnectthewatchtoyourcomputerusingtheUSBcable,andthenopentheDeviceAgentapplicationon
your computer desktop.
• PCSYNCREADYdisplayswhenthecomputerstartscommunicatingwiththewatch.Anerrormessage
displays if it was unsuccessful.
• PCSYNCINPROGRESSdisplaysduringthesyncprocess.
2. If a workout is in progress, the computer application requests confirmation that you wish to continue
withthesyncprocess.SelectNOtoendthesyncprocessandreturntoTimeofDaymode,orselectYES
to continue.
3. IfyouselecttheblinkingYESoptiontocontinuewiththecomputersync:
a. Another message pops up asking if you wish to save the workouts.
b.SelectYEStosavetheworkoutsession(Chrono/Timer/IntervalTimer)withsensorinformation.Thewatch
stopscurrentlyrunningworkouts,turnsofftheGPSandANT+
™
Radio, and continues the computer
sync process.
c.SelectNOtostoptheworkoutwithoutsaving.Thewatchcontinuesthecomputersyncprocess.
4. Whenthecomputerdownloadiscomplete,thePCSYNCTRANSFERCOMPLETEmessagedisplays,andthe
watchreturnstoTimeofDaymode.