Operation Manual

22
Auto Start and Auto Resume
Setting Group Adjustment
AUTO START Select ON to start the chronograph automatically when you move at or above the
speed threshold. Select OFF to disable auto start.
AUTO RESUME Select ON to restart the chronograph automatically after you stop and then begin
moving again at or above the speed threshold. Select OFF to disable auto resume.
SPEED THRESHOLD Enter the speed at which the chronograph will automatically start. Press 8 to close
the setting change window. The minimum is 0.10. The maximum is 99.99.
Auto Stop
Setting Group Adjustment
AUTO STOP Select ON to stop the chronograph automatically when you go below the speed
threshold. Select OFF to disable auto stop.
SPEED THRESHOLD Enter the speed at which the chronograph will automatically stop. Press 8 to close
the setting change window. The minimum is 0.1. The maximum is 99.99.
Auto Split
Setting Group Adjustment
AUTO SPLIT Select DISTANCE to automatically take a split when you reach a multiple of the
selected distance. Select BY TIME to automatically take a split each time the
selected time interval elapses. Select OFF to disable auto split.
DISTANCE Enter the distance at which to automatically take a split. Press 8 to close the
setting change window. The minimum is 0.10. The maximum is 99.99. NOTE: This
setting is only available if the Auto Split setting is set to DISTANCE.
TIME Enter the elapsed time at which to automatically take a split. Press 8 to close the
setting change window. The minimum is 00:00:01. The maximum time is 9:59:59.
NOTE: Time settings are only available if the Auto Split setting is set to BY TIME.
Auto Timer