Owner manual

Once you know your declination angle:

1. Press MODE until COMPASS is shown.

2. Hold SET to start.

3. Keeping the watch level and facing up, rotate it twice (taking at least

15 seconds per revolution) and then press MODE.

4. Press START/SPLIT or STOP/RESET to increase or decrease setting

values to match your chosen declination angle.

5. Press MODE to advance to the next setting option.

6. Press SET to finish.

If you see CAL OK at the end of the calibration process you have suc-

cessfully calibrated the compass. If you see CAL FAIL, repeat the cali-

bration process.

ATTENTION: Calibration may fail if you rotate the watch too

quickly or take longer than one minute to complete.

Calibration may also fail if you are near objects that are

magnetic.

CITY DEC. ANGLE CITY DEC. ANGLE

Mumbai 0° W Seattle 17° E

Munich 1° E Seoul 7° W

New York 12° W Sydney 12° E

Orlando 5° W Tokyo 6° W

Oslo 1° E Toronto 10° W

Paris 0° W Vancouver 17° E

Reykjavik 15° W Warsaw 4° E

Rio De Janeiro 22° W Washington DC 10° W

For cities that do not appear on the table above, you can find your declina-

tion angle using the declination angle calculator at the URL listed below.

Note that you will need to know the latitude and longitude of your location

before you can calculate the declination angle at this website. Latitude

and longitude information can be found on the internet.

http://www.ngdc.noaa.gov/geomagmodels/struts/calcDeclination

TMX_W253_WS4_EU_EN.qxd 10/15/08 3:16 PM Page 26