MARATHON® GPS SPEED+ DISTANCE WATCH MANUAL
Table of Contents Introducing Your Watch...........................................................................................................3 Features.....................................................................................................................................3 Charging the Watch....................................................................................................................3 Basic Operation.....................................................................
Introducing Your Watch Congratulations on your purchase of the Timex® Marathon® GPS watch. As a serious road runner, you’ll appreciate the accurate speed, pace, and other data the watch provides you. The watch’s GPS technology finds satellites from almost anywhere in the world so you have the information you need to train efficiently. Features • G PS – Obtain fixes on satellites to provide workout data.
INDIGLO® NIGHT-LIGHT BUTTON Press to turn on the night-light for 10 seconds. GPS ON/OFF Press to turn on the GPS. Hold to turn off the GPS. MODE Press to cycle through each mode. In settings screens, press to move to the next item. START/SPLIT/+ In Time mode, press to go to Run mode. In Run and Chrono modes with the timer stopped, press to start the timer. In Run and Chrono modes with the timer running, press to take a split.
Setting Up the User Profile Enter your gender, age, weight, and height to ensure accurate calorie calculations. 1. Press MODE until SET displays. 2. Press + or - to select USER, then press OK. 3. Press + or - to select gender, then press OK. 4. Repeat step 3 for age, weight, and height. 5. Press MODE to exit. Turning on the GPS Before you can use the watch to collect speed, pace, and distance data, you must turn on the GPS and acquire a satellite fix. 1.
Stopping a Workout 1. While the timer is running, press STOP to pause the timer. 2. If the timer is stopped, but has not been reset, press START to resume timing. Saving and Resetting a Workout When you reset a workout, the workout data is saved in memory so you can review it later. 1. While the timer is paused, hold SAVE to save the workout and reset the timer. All collected data is saved. See Reviewing Workouts for instructions on viewing saved data.
Changing the Display View While a lap is in progress, you can switch between two view screens that each display different data about the lap. Both displays show the lap and split times, but one display shows the lap number while the other shows the distance traveled during the lap. • Press VIEW to switch the display views. Taking Splits, Stopping, and Saving a Chrono Workout Take splits, stop the timer, and save and reset the workout as described in Using Run Mode.
Deleting Workouts To free up memory on the watch, you can delete one or more workouts. Deleting One Workout 1. Press MODE until RUN DATA displays. 2. Press + or - to select a workout to delete, then press VIEW. 3. Press VIEW until VIEW/dEL/ALL displays. 4. Press + or - to select dEL, then press OK. The workout is removed from memory. NOTE: There is no confirmation when deleting a workout; the workout is deleted immediately when you press OK. Deleting All Workouts 1.
Configuring Settings The settings changes described in this section are not required, but you can use these settings to get the most out of the watch. Setting Up Automatic Laps You can set the watch to take a split automatically during workouts. Automatic laps work in both Run and Chrono modes when the timer is running. You choose one of the preset distances, and the watch takes a split for you so you don’t have to break stride or take your eyes off the road. 1. Press MODE until SET displays. 2.
Turning Button Beep On and Off Select whether or not the watch emits a beep when any button is pressed. 1. Press MODE until SET displays. 2. Press + or - to select KEY TONE, then press OK. 3. Press + or - to select ON or OFF, the press OK. 4. Press MODE to exit. When KEY TONE is ON, the G icon displays in the lower right of the display. You can also set the button beep when setting the alarm. See Setting the Alarm Time for more information.
Time Zones Consult this chart for guidance in setting your time zones. If your city is not listed, and you do not know your GMT offset, select the city that is nearest to you.
Warranty and Service Timex International Warranty (U.S. Limited Warranty) Your Timex® GPS watch is warranted against manufacturing defects by Timex for a period of ONE YEAR from the original purchase date. Timex Group USA, Inc. and its worldwide affiliates will honor this International Warranty. Please note that Timex may, at its option, repair your Timex® product by installing new or thoroughly r econditioned and inspected components or replace it with an identical or similar model.
Declaration of Conformity Manufacturers Name: Timex Group USA, Inc. Manufacturers Address: 555 Christian Road Middlebury, CT 06762 United States of America declares that the product: Product Name: Timex® Marathon® GPS Watch Model Numbers: M434 conforms to the following specifications: R&TTE: 1999/05/EC Standards: ETSI EN 300 440-2 V1. 4.1 (2010-08) ETSI EN 301 489-1 V1. 8.1 (2008-04) ETSI EN 301 489-3 V1. 4.
