Operation Manual

104

105

4TH CENTER HAND CALIBRATION

The 4th center hand is calibrated at the Timex factory to

reﬂect the standard minutes within the hour as deﬁned

by Universal Time Coordinated. Globally a majority of

locations use the standard minutes. If the location you are

using for the 2nd and 3rd time zone uses the standard

minutes, the 4th center hand does not require recalibra-

tion. Only if you wish to have the second and third time

zones to reﬂect locations that do not follow the standard

minute, the instructions to recalibrate the 4th center hand

are as follows:

1. Pull the crown out to position 3. The 4th center hand

will point to 12 o’clock.

2. Rotate the crown to position the minute hand in the

correct position within the hour required for the loca-

tion you are wishing to use for the 2nd and 3rd time

zones.

3. Push the crown in to position 2. The 4th center hand

will point to its currently calibrated position of the

minutes within the hour.

4. Push button A to move the 4th center hand clockwise

until it aligns with the minute hand. Pressing and hold-

ing button A will make the hand move at a fast rate.

5. Pull the crown out to position 3. The 4th center hand

will point to 12 o’clock.

6. Rotate the crown to position hour and minute hands

to the correct time.