Operation Manual

Interrupting the countdown sequence: If you wish

to stop the countdown sequence prior to the sequence

reaching zero, you may do so by pressing button A (the

fourth center hand as well as the upper and lower hands

will stop moving). If you wish to later begin the sequence

from the point at which you stopped the countdown, sim-

ply press button A again (the fourth center hand as well

as the upper and lower hands will resume moving).

Resetting the countdown sequence: Once the count-

down sequence has reached zero and the chime has

sounded, you may reset the countdown timer to the set

value by pressing button B (the fourth center hand as well

as the upper and lower hands will move to indicate the

value of time you set prior to using the countdown timer

function).

Clearing the countdown timer value: If desired, you

may clear the value of the countdown timer to zero.

This can only be done if the countdown timer is not in

operation and has been reset. If the countdown timer is

running, you must ﬁrst stop the countdown sequence by

pressing button A, followed by pressing button B. This

will stop and reset the countdown timer to the currently

selected time value. To clear the countdown timer value

to zero, push and hold button B for two seconds. You

should now follow the instructions to set the countdown

timer value to the new desired length of time.