Operation Manual

94
95
set, the hand will point to the time previously set. If
this is the first time the timer is being set, it will point
to the 0 on the timer scale.
2. Pull the crown out to the middle position.
3. To set the desired number of hours in half hour incre-
ments (up to the maximum time of 4:00:00), press
button A to move the upper hand counterclockwise
(pressing button B will move this hand clockwise),
until the desired number of hours has been selected.
Please note that you are selecting the number of
hours in the closest half-hour increment to the total
desired time (example: for a total desired countdown
time of 2:53:30, you will select 3 hours). Once you
have completed setting the number of hours, press
button C to confirm your selection.
4. Now you may set the desired number of minutes in
one minute increments by pressing button A to move
the lower hand counterclockwise (pressing button
B will move this hand clockwise), until the desired
number of minutes has been selected. Please note
that you are adjusting the number minutes forward
or backwards to get to the desired time (example: for
a total desired countdown time of 2:53:30, you will
press button A seven times which will move the total
countdown time from 3 hours to 2:53:00). You will no-
tice the hour hand will move slightly backwards from
the 3 hour marker towards the 2.5 hour marker. Once
you have adjusted the time to the correct number of
minutes, press button C to confirm your selection.
5. Now you may set the desired number of seconds in
one second increments by pressing button A to move