Operation Manual

82
83
3. To take a split time, press button B (SPLIT/RESET).
The upper, lower, and 4th center hands will hold their
positions for you to note the split (lap) time. The chro-
nograph is still maintaining the timing sequence while
the hands are stopped. To release the hands, press
button B (SPLIT/RESET) and the hands will quickly
catch up to display the total elapsed time.
4. To stop, press button A (START/STOP) which will stop
the chronograph. (Please note: button C is disabled
while the chronograph is stopped until the chrono-
graph is reset).
5. To reset, press and hold button B (SPLIT/RESET) for
3 seconds, which will reset the chronograph back to
the beginning of the 30-minute scale.
In normal operation the Chronograph will cycle through
the 30-minute sequence twice for a total maximum of
one hour. Once this hour has elapsed, the upper hand
will remain on the 30 minute marker and the lower hand
will return to zero. The chronograph function will need
to be reset prior to using the chronograph function again
or before changing to a different mode. (Please note:
button A is disabled when the maximum one hour time
has elapsed and will not function until the chronograph
has been reset by pressing and holding button B for
3 seconds).