User's Manual

Timer Mode (Countdown Timer)

The Timer will count down from a set length of time up to 100 hours.

At the end of the countdown, the Timer will optionally a) Stop at End,

b) Repeat at End or c) Stop and Start the Chronograph (Chrono must be

reset). It will also display selected speed or distance information for the

timed interval.

Setting the Timer:

A. In Timer mode, press SPLIT/RESET/SET button. The TENS OF HOURS

value will flash. Press

START/STOP to increase setting.

B. Press

MODE. HOURS display will flash. Press START/STOP to increase

setting.

C. Repeat for minutes and seconds.

Recall Mode

Chrono Recall allows you to review stored lap information while the Chrono

is running or stopped.

A. In

Recall mode, press SPLIT/RESET/SET repeatedly to display, in order,

Average Speed, Average Pace, Distance and Lap and Split times for the

first lap. Lap time appears in upper line of display. The lap number

display has an R in front of it to indicate recall. Continue to press

SPLIT/RESET/SET to display information for successive laps until the

final lap. Press

START/STOP to go back to previous display.

B. If no speed and data information was recorded for a lap, then only the

lap time (in upper line of display) and split time are displayed.

C. Press

MODE button at any time to return to Time mode.

D. To rapidly scroll through multiple laps, press and hold

SPLIT/RESET/SET

or START/STOP.