Quick Start Guide

10
11
three indexing positions: closed, middle and outer. To
familiarize yourself with the difference between the vari-
ous positions extend the crown to its outer position and
then push the crown very lightly until you feel it click into
the middle position. To set the time: Pull the crown to its
outer position and turn it until the correct time is shown.
Once the dial reflects the correct time, return the crown
to the closed position.
INDIGLO
®
NIGHT-LIGHT:
Press the crown to activate the INDIGLO
®
night-light. The
light will remain on for 2-3 seconds after releasing the
crown.
phone. You must start the synchronization process
from the Smartphone within 10 seconds, or the Blue-
tooth on the watch is switched off and you will need
to place the watch back into Bluetooth mode.
After the synchronization process has completed, the
Bluetooth on the watch is switched off. Both of the
sub-dial hands will return to their positions previous
to entering the Bluetooth mode. The Smartphone
application will indicate the success or failure of the
synchronization process.
TIME SETTING
NOTE: The watch crown has four positions: one temporary
push position used to activate the INDIGO night-light, and