Instruction Manual

MANUALTIME SETTING: In the event you need to update the time setting on your watch when your
Smartphone is out of range of the watch, you may do so manually. NOTE: The watch crown has four
positions: one temporary push position used to activate the INDIGO night-light, and three indexing
positions: closed, middle and outer. To familiarize yourself with the difference between the various
positions extend the crown to its outer position and then push the crown very lightly until you feel it click
into the middle position. To set the time: Pull the crown to its outer position and turn it until the correct
time is shown. Once the dial reflects the correct time, return the crown to the closed position.
MANUAL SYNC: In the event you wish update the time and date setting on your watch between the
automatic time/date sync which occurs every 6 hours, you may do so manually. Open the Timex
Connected app on our Smartphone. When instructed to do so by the app, push and hold the crown for
about 5 seconds to activate the Bluetooth radio. A tone will sound on the watch as the Bluetooth radio is
activated. Once the sync cycle is complete, you will hear an ascending melody to note a sync success or
a descending melody to note sync failure. NOTE: The watch must be within 2 meters distance of your
Smartphone for optimum communication
INDIGLO® night-light: Press the crown to activate the INDIGLO night-light. The light will remain on for 2-
3 seconds after releasing the crown.
HAND ADJUSTMENT: In the event the hands need to be recalibrated, such as after the battery
replacement, open the Timex Connected app on your Smartphone and follow the instructions on Hand
Calibration.
PERFECT DATE: When the second hand function is not selected as perfect date, you can view the
current date by pressing the crown. The INDIGLO night-light will activate and the second hand will stop
its currently assigned function and move to the correct position on the scale to indicate the current date,
pause for 3 seconds and then return to performing its currently assigned function.
ALARM:
Your watch is equipped with an audible daily alarm, which is set and operated from the Smartphone app.
In order to set, activate or disable the alarm, open the Timex Connected app on your Smartphone and
open the alarm setting page. You will be able to set the desired alarm time, activate or disable the alarm.
You will be prompted to manually sync the watch with the Smartphone app in order to push the revised
alarm settings to the watch. The watch will retain the new alarm settings until new settings are applied
via synchronization. The alarm will activate the audible tone at the desired time each day. When the
audible tone sounds the INDIGLO night-light will flash. To silence the tone and the INDIGLO night-light,
press the crown.
COUNT-DOWN TIMER:
Your watch is equipped with a count-down timer with an audible alert, which is set and operated from the
Smartphone app. The duration of the count-down timer can be set for a maximum of 23:59:59 and a
minimum of 00:00:15. In order to set, activate or disable the count-down timer, open the Timex
Connected app on your Smartphone and open the count-down timer setting page. You will be able to set
the desired count-down duration, activate or disable the count-down timer. You will be prompted to
manually sync the watch with the Smartphone app in order to push the revised count-down timer settings
to the watch. The watch will retain the new count-down timer settings until new settings are applied via
synchronization. Once started, the timer will count-down the selected duration to zero. Once the timer