Use Instructions

EN | 9T. [phone] | www.healy.eu | [e-mail]
Important note on using the adhesive electrodes:
• Never place electrodes in the region of the carotid artery
• Do not place the electrodes on open wounds
• Before use clean the treatment area and if necessary shave
the area
• Choose an area free from hair, skin lesions or scars, folds in
the skin, or bony protuberances and which is not in the vicini-
ty of metallic implants.
• Clean and dry the application area before placing the elec-
trode on it.
• Avoid the use of solvents as these could cause skin irritation
and reduce the adherence of electrodes.
• If using alcohol to clean the area, make sure that it has com-
pletely dried before applying the electrodes.
• Connect the electrode to the cable of the electrostimulator.
• Check the functioning of the system before beginning the pro-
cedure.
• If the procedure is interrupted, check the functioning of the
system again before recommencing the session.
• Remove the liner and apply the electrode to the skin surface.
• Before switching on the electrostimulator, check the adher-
ence of the electrode to the skin surface.
WARNINGS:
• A reduced contact between the skin and the electrode may
cause the electric current to concentrate in one point and
cause burning.
• Interrupt the treatment if there is discomfort or a burning sen-
sation.
Figure 3.1.5.3:
Scan serial number screen
Figure 3.1.5.4:
Connect screen