Use Instructions
EN | 13T. +49 30 54905949-1 | www.healy.eu | info@healy.de
5.2 Cleaning
Switch o the Healy before
cleaning. For cleaning, com-
mercial cleaning products may
be used. The surfaces can be
wiped with a damp sponge or
cloth. Do not use too much liq-
uid and make sure that no liq-
uid penetrates beneath the
covers or enclosures.
Caution:
Do not use cleaning agents
with solvents (e.g. acetone,
nail polish, cleaners) or abra-
sive cleaners as they will dam-
age the surface.
5.3 Disinfection
Disinfection should be per-
formed in the same manner
as cleaning. Use only chem-
ical disinfectants in liquid
state cleared by the FDA. Use
a sponge or a cloth to wipe the
disinfectant over the device.
Caution:
Spray disinfection can cause a security risk. Only use disinfec-
tant wipes.
5.4 Storage between Applications
After the treatment unplug all cables and electrodes and put
them into the storage case and store in a cool and dry location.
Refer to the safety notes for environmental storage conditions.
5.5 Maintenance
There are no serviceable parts by the users. In a case of dam-
age, please contact the manufacturer. The following mainte-
nance activities are recommended and should be considered for
safe working.
Frequency By whom Maintenance activity
Prior to
each use
User Check housing, cables and elec-
trodes for damages. In case of
damage, contact the manufactur-
er or an authorized dealer
5.6 Troubleshooting
In the following you nd typical warnings or messages that are
related to the app or hardware of the device. If you face an event
that is not listed here or a problem still exists, please contact the
manufacturer.
Figure 4.4.1: Pause screen
By pressing the “X” in the
pause screen you cancel the
program and get back to the
overview interface.