SDS

SAFETY DATA SHEET
A07758 TM CLEAN & FRESH 12n6.6
Version 2.1 Revision Date 03/06/2017 Print Date 03/22/2018
4 / 13
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
For safety reasons in case of fire, cans should be stored
separately in closed containments.
Use a water spray to cool fully closed containers.
Special protective equipment
for firefighters
: Wear self-contained breathing apparatus for firefighting if
necessary.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
: Use personal protective equipment.
Remove all sources of ignition.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions : Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up and shovel into suitable containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling : Keep away from fire (No Smoking).
Avoid contact with skin and eyes.
Smoking, eating and drinking should be prohibited in the
application area.
Always replace cap after use.
Use only with adequate ventilation.
Do not breathe vapours or spray mist.
Conditions for safe storage : BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Observe label precautions.
Keep in a dry, cool and well-ventilated place.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid : Keep away from oxidizing agents and strongly acid or alkaline
materials.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters