Getting Started Guide

1 Getting Started

1.1 Getting to know your touch phone

1.2 Installing the SIM card, battery, and storage card

You need to remove the back cover before you can install the SIM card

and battery. Also, make sure to always turn off the power before

installing or replacing the SIM card and battery.

To remove the back cover

1. Make sure your device is turned off.

2. Firmly hold the device with both hands and the front panel facing

down.

3. Push the back cover up with your thumbs until it disengages from the

device and then slide it up to remove.

To remove the battery

1. Make sure your device is turned off.

2. Remove the back cover.

3. The bottom of the phone has a notch. Lift the battery by the notch to

remove it.

To install the SIM card

The SIM card contains your phone number, service details, and

phonebook/ message memory. Your device is supported 2G, 3G

(WCDMA) or 4G (FDD_LTE) SIM cards.

1. Remove the battery if it is installed.

2. Locate the SIM card slot, and then insert the SIM card with its gold

contacts facing down and its cut-off corner facing out the card slot.

3. Slide the SIM card completely into the slot.

Note: • The phone can be supported the double SIM cards. The card

slot will be supported 3G (WCDMA) or 4G SIM card (FDD_LTE), but

one SIM card can use 4G networks only.

If you need to use 4G operation, please insert 4G card in the card

slot (network type is default 4G, defined in the menu

Settings/More/Cellular networks/Preferred network type), If insert