Communication is Connection Timekettle M3 Translator Earbuds www.timekettle.co support@timekettle.
English 01 中文 15
On/Off English Power On: taking out the earbuds from the charging case, the indicator light flashes green once to indicate that the earbuds are powered on. Package List Status Indicator Touch Control Noise Cancellation Microphone Microphone Battery Indicator Type-C cable USB Type-C Charging Port EarTtips (S, M, L) User Manual * How to wear: Choose the right size tip for your ears for the best fit and seal. 01 Power off: the earbuds will power off automatically after being placed in the charging case.
Bluetooth Pairing 1. The earbuds will automatically enter Bluetooth pairing mode once removed from the charging case, with the status indicator continuously flashing white. 2. Select "Timekettle M3”on the Bluetooth list of the phone to build the connection by accepting the pairing request.
Touch commands Timekettle APP Download Music mode： Press Twice Continuously Press Three Times Press and Hold For 2s Previous song Activate voice assistant Switch to transparency mode /enable/disable Noise Cancelling Press Once Play Press Once Play Pause Pause Press Twice Continuously Press Three Times Press and Hold For 2s Next song Activate voice assistant Switch to transparency mode /enable/disable Noise Cancelling Phone Mode： Press Twice Answer a Call End a Call ANC ANC *Note: UI
Translation feature 1. Open the APP to complete registration and login and allow all access permissions to ensure the translation feature works properly. 2. On Product Selection page, select "Timekettle M3", then enter the Bluetooth pairing page to complete the pairing. 3. Choose the corresponding translation mode for different usage scenarios.
Troubleshooting ●Unable to use the APP translation feature properly 1.Make sure both earbuds are correctly connected to the APP. Note: the translation feature cannot be used with only one earphone connected. 2.Disconnect other Bluetooth devices connected to the phone, such as a smartwatch using the phone's microphone permission at the same time. 3.Close the app and reset the earbuds and reconnect the phone via Bluetooth pairing. ●No sound in one or both earbuds 1. Check if both earbuds are out of battery.
Product Information Model: Timekettle M3 Bluetooth version: 5.2 Power input: 5V⎓1A Weight of Earbuds: 5g (one piece) Weight of charging case (including earbuds): 60g Charging case battery: 400mAh Earbud battery: 50mAh (one piece) Music playback time with Noise Cancellation On: approximately 6 hours Music playback time with Noise Cancellation off: approximately 7 hours Safety Please read the following safety and warning information before using M3. 1.
Warranty regulations 1.If the product and accessories have any quality issues within 1 year (unless otherwise states by local laws & regulations) and 6 months respectively from the date of purchase, you may be qualified for free repair service with proof of purchase and warranty card. 2.What is NOT covered by the warranty: a. Product is worn due to regular usage. b. Failure to use in accordance with the instructions. c. Damage caused by human or irresistible factors. 3.
