Application Guide

6
Touch mode :
Both users can choose the two languages for translation, and each of them wears the
corresponding earbud to undergo translation. One of them can tap the force sensor
on the earbud (under the indicator light) to speak. Your messages will be
automatically recorded into our app, and then translating into the selected language.
After that, the translated message will be played in the other person's earbud, and
vice versa.
*If one of the users taps the force sensor of his own earbud while the other is
speaking, the voice recognition will be forcibly stopped, and the pickup channel will
be switched to his own.
Listen mode:
Select the ‘Listen’ mode in APP and choose the two languages for translation. With
respect your personal needs, you can either wear one or two earbuds. After that, it
will detect the surrounding sounds under a stable environment. Then the real-time
translation will start transmitting to you. The quality of voice pickup will vary
depending on many factors (for example, voice volume).
Speaker mode:
Select ‘Speaker’ mode in APP, press the force sensor of the earbuds to speak, and
then the translation will be played through the phone speaker. If anyone would like
to respond, please select another language from the app and speak, the translation
will then be played via your headset.
Bluetooth devices cannot be found on the mobile page:
1. Please confirm that the indicator status of either one of the earbuds is blinking
quickly, while the other one is blinking slowly. This status indicates that the Bluetooth
connection is in the progress.
a) When the two earbud indicator lights blink slowly, please put the earbuds back to
the charging case, separately short press the left and right earbud four times and
the yellow light fast flashes. Meanwhile, the earbud set is undergone reset. After
finishing the reset, take the earbuds out and reconnect it with the phone.