User guide

6
230VAC~50Hz
Filament/incandescent3000W
FluorescentorLowenergyup
to500W
Not suitable for discharge
lighting e.g. SON or Metal
Halide
Dusk - Dawn and Dusk to
2/4/6/8hoursOFF,(adjustable
Dusksensing)
IP55(suitableforoutdooruse)
73/23/EECand89/336/EEC
Technical specifications
Solution
The level of ambient light in the area may
be too bright to allow operation at the
current DUSK setting. During the hours of
darkness first turn the Time Delay knob to
minimum then adjust the DUSK control
slowly clockwise until the lamp illuminates.
Refer to previous section for more details.
Adjustthesettinganti-clockwisetolower
the level of ambient light required for
activation.
Problem
• Thesensor
will not
operate at
night.
• Unit
activates
during the
daytime.
Troubleshooting guide
PowerSupply:
MaximumSwitching
capacity:
Operation:
EnvironmentalProtection:
ConformstoDirectives:
Installation & Operating
Instructions