LEDPRO Wi-Fi PIR Camera System Model: LEDPROCAM
1. General Information These instructions should be read carefully and retained for further reference and maintenance. Note: Timeguard reserve the right to alter these instructions at any time. Up to date instructions will always be available for download at www.timeguard.com 2. Safety • Before installation or maintenance, ensure the mains supply to this system is switched off and the circuit supply fuses are removed or the circuit breaker turned off.
• Audio: • Siren Volume: • Operating Temperature: • WLAN Standard: • WLAN Standard: • Supports SD Card: • Cloud Storage: • Power Consumption: • Lux Level: • Weatherproof Rating: • CE Compliant • Dimensions (H x W x D): 2 Two Way 100dB 0º - 40º 802.11 b/g/n 2.
. System Requirements • Smartphone/Tablet with at least iOS 9.0 or Android 6.0 • WLAN-enabled router: 2.4GHz (Separate Band) • Tuya Smart App 5. PIR Operation • A moving human body or object needs to cross one of these zones to activate the sensor. The optimum height for this is between 1.5m - 2.5m mouting height. Careful positioning of the luminaire is required to ensure the best performance from the PIR and the appointed approach path. SIDE V IEW TOP V IEW 270° 3 2.
6. Installation Note this procedure should be carried out when the luminaire is detached from the wall. Brackets for 10W, 20W LEDPRO floodlights included. • Ensure the mains supply is switched off and the circuit supply fuses are removed or the circuit breaker is turned off. • Remove the floodlight from the wall bracket if already in place on the wall, unfasten the cover of the LEDPRO floodlight by removing the x4 screws as shown below.
• Attach the jumper plug for the LEDPROCAM to the socket connector of the LEDPRO floodlight. DO NOT FORCE. THE PLUG AND SOCKET WILL ONLY FIT ONE WAY AROUND. Jumper Plug Locking bar bar with one with the other to reconnect). 5 • Pass the mains supply and load cables into the holes provided on the LEDPROCAM’s back cover ensuring that a cable gland, grommet or sealing compound is used to maintain the IP rating.
. Connection Diagram 6 Mains Supply Isolation Switch 'Switch Live' Note: Any floodlight connected to the L1 Switch Live terminal 'Live Output' will be controlled by the LEDPROCAM.
. Camera Head Adjustment • The detector head can be panned 10˚ to the right and 10˚ to the left as well as up and down. 10 10 Tilt down 10 7 9. Downloading App and Registration Note: the mobile or tablet device must be connected to a 2.4GHz band on the router. Pairing on the 5GHz band will result in paring timing out or being unsuccessful. Refer to your ISP (Internet Service Provider) on separating the bands if required. • Ensure your phone or tablet is connected to your local Wi-Fi network.
3 8 • Install the App and open it to the registration screen. Click on the ’Register’ button. • Tap ‘Agree’ to accept the privacy policy. • Choose your region by selecting your ‘Country Code’. Enter your email address and phone number and click ‘Get Verification Code’. • Enter the verification code sent to the email address or phone number that you provided. Once you have successfully entered the code, the app will automatically move you to the password screen.
. Pairing Device(s) Note: if you are using a VPN, make sure this is disabled before continuing and ensure that a 2.4GHz Wi-Fi band is enabled for this device. The Reset button is behind the rubber flap along side the Mirco SD card reader. • Once you are on the home page of the Tuya Smart App Press the plus button ‘ ’ on the top right hand side of the app. • Under the ‘Add Manually’ menu, select the ‘Security & Video Sureillance’ catagory on the left hand side of the app.
. Smart Home Assistant For Smart Home Assistant services such as Google Home or Amazon Alexa, follow the on-board instructions on the TuyaSmart App. This can be found under the ‘Me’ section on the home page of the App. Note: The Smart Home Assistant services supported by the TuyaSmart App may change as it is a 3rd party App Service. Any services that may be removed are the responsibility of TuyaSmart developers and not Timeguard.
If you experience problems, do not immediately return the unit to the store. Email the Timeguard Customer Helpline: HELPLINE helpline@timeguard.com or call the helpdesk on 020 8450 0515 Qualified Customer Support Coordinators will be online to assist in resolving your query. For a product brouchure please contact: 67.058.688 (Issue 2) T.W - October 2021 Timeguard Limited. Victory Park 400 Edgware Road, London NW2 6ND Sales Office: 02084521112 or email csc@timeguard.com www.timeguard.
