Instruction Manual

1
1. General Information
These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the luminaire
is switched off and the circuit supply fuses are removed or the circuit breaker
turned off.
• It is recommended that a qualified electrician is consulted or used for
the installation of this luminaire and install in accordance with the
current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this luminaire is fitted
does not exceed the rating of the circuit cable, fuse or circuit breaker.
3. Technical Specifications
• 230V AC 50 Hz
• This luminaire is of class I construction and must be earthed
• LED non replaceable lamp
•
•
•
Colour Temperature: 5000K
IP65 Rated suitable for restricted external applications
UKCA & CE Approved
Model
LEDBHR7W
LEDBHR15W
LEDBHR25W
LEDBHO9WN
LEDBHO15W
LEDBHO25W
Watts
7W
15W
25W
7W
15W
25W
Lumen
Output
700lm
1000lm
2000lm
700lm
1000lm
2000lm
Mounting
Hole Centres
88mm
126mm
155mm
124mm
176mm
220lm
Dimensions
Ø153 D:59
Ø185 D:65
Ø244 D:75
H:155 W:100 D:52
H:215 W:131 D:69
H:270 W:165 D:86