Instruction Manual

4. Button Fuctions

• LUX control adjustment.

(Auto mode only).

• Time delay adjustment

(up to 60 minutes

Auto mode only).

• Independant channel control

(PDFM362AB only).

• Sensitiveity control.

• Manual override ON/OFF

(10 hours).

• Learn mode: Set for a specific

Lux level.

• Lock/Unlock PIR settings.

• Semi Auto mode: Absence

• Auto mode: Presence

• Pulse mode

5. Changing Lux Values

• To modify the LUX value using the remote control, press

the lock/unlock button on the remote control to lock

and then unlock the PIR. There will be x2 flashes from the

LED receiver of the PIR, this indicates that the PIR is unlocked

and ready to receive further instructions from the remote

control.

Note that Lux value changes are subject to Presence

mode (Auto) only.