Models EL11 (24 hour) EL17 (7 day) I N S T A L L A T I O N & operating instr u ctions PanelMASTER
Figure 1 Override button (also used in conjunction with the programme button to programme clock and times/days for ON periods 24 hour clock display Contents 21 1 1 1 4 2 2 2 Programme button used to programme clock and times/days for ON periods Slide switch provides continuous ON, continuous OFF or normal programme operation EL11 (24 hour) or EL17 (7 day) Panel mount bezel Tamper proof cover Surface mount stand offs (length 10mm) Panel mount bolts Self-tapping screws (No.
Installation – Panel Mounting For panel mounting (in panels up to 7.0mm thick with the cut-out as shown in figure 3) the EL11/17 should be snapped into the bezel supplied and secured in place by the use of the 2 No. 6 x 3/8" self-tapping screws provided as shown in figure 4. When selecting a position for the unit it should be born in mind that a clearance behind the front panel surface of 26.0mm is required over the full area of the panel cut-out.
Figure 5 Use No. 6 x 3/8" selftapping screws to fully secure bezel to EL11/17 (fixed from rear) Bezel No. 4 x 5/8" selftapping screw Bolt Figure 4 Surface Mounting 23 The EL11/17 without bezel can be surface mounted using the 4 securing holes as shown in figure 6. The unit can be stood off from the mounting surface by 10mm using the 4 spacers if required.
EL11 Programming Instructions Change Button sets Hours and Minute times and self cancelling override Easy view 24 hour digital clock/timer display Programme Button used to select the clock time and the 4 ON/OFF programme times and to review them once set Output Status showing unit either ON or OFF Battery This product has a factory fitted rechargeable battery. If the time controller is left with its mains power switched off for more than 1 month the display may go blank.
Programming sequence Setting clock ... . . . ➔ .. Programme 1 ON . Programme 1 OFF ... .. Programme 2 ON . Programme 2 OFF . . . . . Programme 3 ON Programme 3 OFF Programme 4 ON Programme 4 OFF Operating Mode Note: Button pauses greater than 1 minute during programming will result in automatic return to the operating mode. 2 Setting Clock (after reset) i 25 Hour Setting – Press the button to advance the hour setting. Note: For rapid hour selections press and hold down button.
iii Press button once – the first ON time is now set and display shows ready for the first OFF programme time. iv Now set the hrs and minutes as before. 1 2 3 4 v Repeat steps i to iv to set the remainder of the 3 ON/OFF times as required. Note: Any unused ON/OFF programme should be skipped until the display shows normal operating mode. Do not programme ‘0’s into unused programmes. IMPORTANT After setting a clock time which falls within a programmed ON period, the unit will not switch ON.
EL17 Programming Instructions Change Button sets Day(s), Hours and Minute times and self cancelling override Easy view 24 hour digital clock/timer display Programme Button used to select the clock time and the 6 ON/OFF programme times and to review them once set Output Status showing unit either ON or OFF Day indicator 1 = Monday 7 = Sunday Battery This product has a factory fitted rechargeable battery.
Programming sequence .. . . . . ➔ Programme 4 ON Setting clock .. Programme 1 ON Programme 4 OFF .. .. Programme 1 OFF Programme 5 ON .. Programme 2 ON Programme 5 OFF .. .. Programme 2 OFF Programme 6 ON .. Programme 3 ON Programme 6 OFF . Programme 3 OFF . . . . . . . Operating Mode Note: Button pauses greater than 1 minute during programming will result in automatic return to the operating mode. 2 Setting Clock (after reset) i 28 Day Setting – Press button to advance to the day required.
1 2 3 4 5 6 7 ● ● ● ● ● = 5 days (Weekdays) Mo Tu We Th Fr ● ● = 2 days (Weekend) Sa Su ● ● ● ● ● ● ● = 7 days (Everyday) Mo Tu We Th Fr Sa Su ● = Individual days Starting with Monday through to Sunday 29 ii Once day option selected press button once to select hour time – display shows hour digits and ON flashing. Press button to advance hour setting. ● (Note: Monday shown as an example of days set).
6. Cancelling Programmes Any ON/OFF programme can be cancelled by clearing its ON and OFF time. Follow step 5 and when into the ON or OFF programme to be cancelled press the button until the hour digits show --: then press the button to clear the programme. The display will show the hour and ● minute digits and ON or OFF flashing. 1234567 (Note: Monday shown as an example of days set).
Helpline 020-8450-0515 For a product brochure please contact: Timeguard Ltd. Victory Park, 400 Edgware Road, London NW2 6ND Tel: 020-8452-1112 or email csc@timeguard.com Designed and manufactured in the U.K.
