User's Manual

S1C Manual page : 4
:S1C
A guided tour of your highly accurate timecode, genlock
generator and multi-channel digital timecode transceiver
with integrated WiFi
Timecode Mode. Choose from three settings:
• INT GEN. Activates the highly accurate internal generator.
From here you can set your own T/C, user bits and FPS settings.
• EXT RF (Cont). Constantly jam syncs the internal generator from
the received T/C via Buddy DataLink. If Buddy loses signal of received
T/C, the T/C output continues using the internal generator.
• EXT LTC. Constantly jam syncs the internal generator from the
received T/C via the BNC I/P socket or LEMO 5 socket. If Buddy
loses signal of received T/C, the T/C output freezes immediately.
RF Settings. From here select:
• Channel no. 1 to 14
• RF TX On/Off. When in Internal or BNC modes the Timecode
can transmit its SMPTE timecode data via Buddy
DataLink to any other Timecode Buddy listening on the
same channel.
• RX UBits On/Off. When On the unit will display and output the UserBits
received via RF. If Off the unit will display and output its own UserBits set.