User's Manual

Backlight.
• Always ON
• Timed ON
• Always OFF
System settings. Gives you access to:
• SetTVsynctype.Set to OFF, PAL, NTSC, 720p, 720px2, 1080i,
1080p,1080px2 (x2 double frame rate). Non-standard TC Sync
standards and FPS combinations will be automatically rejected.
• SetTVsynclevel.Set to standard o/p level for 1 camera and HIGH
o/p level for dual load (BNC splitter on 3D camera rigs)
• SetLTCoutputlevel.Set to LINE Level (normal), LOW level and
MIC level.
• SetcountryareaCE/FCC/ARIB
• Restoredefaults.To remove any customisation.
• BuddyLinkID.For future networking features.
• Display.Adjust brightness from 0-100% and ip upside down for
left/right handed use.
UpdatermwareviaaPC:
Visit www.timecodebuddy.com/support and click on the link for ‘mini
trx Firmware’. Follow the detailed online instructions to update your
Timecode Buddy: mini trx using the micro USB port.
Timecode Buddy: mini trx manual page : 8